A4

Roof microphone mount designed to integrate an RSNAV microphone capsule into the unused right-hand-drive microphone location of an Audi A4/S4/RS4 B8. The downloaded design is an Autodesk Fusion 360 CAD file containing BREP design data.

Fits A4 · B8

Two-piece repair kit for a retractable cargo cover: a replacement end-cap repair piece and a screw anchor/plug for the main metal rod. The parts restore shade retraction and tension; the source instructions call for fit checking, possible drilling or filing, epoxy bonding, and ABS with 100% infill. Exact fitment is Audi A4 Avant B5, 1994-2001.

Fits A4 · B5

Replacement clip for the removable back cover of the front seat on the Audi A4 B5 (1994-2001). The creator reports that it repairs a fallen/deformed seat-back cover and can be fastened with glue or, preferably, a screw. The source recommends PETG or ASA and 20-30% infill for durability; verify the original clip profile, seat variant, attachment method, clearance and secure retention before use. Original design by John Rijos (VWrijos), licensed CC BY; attribution is required and the source marks commercial use as allowed.

Fits A4 · B5

Functional rear speaker adapter ring for the Audi A4 B5 (1994-2001). It adapts the stock rear speaker location and mounting holes to a standard 6.5-inch speaker; the source identifies Kicker 6.5-inch hole spacing, reports PLA test prints and vibration, and advises flipping the part upside down in the slicer to avoid supports. Verify speaker fit, depth, clearance, fastening, vibration isolation, and material suitability before use.

Fits A4 · B5

Direct-replacement trunk grocery-bag hook for the Audi A4 B8 Avant (generation 1777, 2007-2015). The source provides two working STL variants; rev2 is described as having an improved hook that retains bags better. Print in a cabin-temperature-capable material, verify fit against the original mounting point, and use only for light grocery or shopping bags after confirming secure retention and clearance. Original source creator: Rota; original source license: Creative Commons Attribution-ShareAlike.

Fits A4 · B8

Two-piece replacement rear-seat fastening clip set with separate outer and inner clip STL files. The source identifies the part as Audi/VAG 4L0886373 for Audi A4/A4 Quattro/S4/S6 applications including A4 B8/8K model years 2008-2015. The source recommends PETG or ASA and 20-30% infill with 1.2-1.6 mm walls; verify fit, orientation, retention, and seat operation before use.

Fits A4 · B8

Full-size dashboard radio-cover frame for the Audi A4 B5 (1994-2001), intended to cover and finish the vehicle radio opening. This variant adds front curvature and differently rounded corners. The source recommends PETG or ASA for durability, 20-30% infill, and verifying supports in the slicer.

Fits A4 · B5

Vehicle-specific replacement cupholder for the fold-down rear-seat armrest on the Audi A4 B8 (2007-2015); the creator also states it will fit the Audi A5 B8 (2007-2016). The creator made it because their A4 lacked rear-armrest cupholders. The supplied single STL is presented at full size; verify fit, retention, clearances, and heat resistance before driving. Creator guidance identifies PETG or ASA; the active catalog material mapped here is PETG. Licensed CC BY with attribution required; the source describes this as a Michael Chen remix of lzrdwrzd's remix of avfor's original model.

Fits A4 · B8 · A5 · 8T

Functional support bracket for the Audi TPMS module, mounted by the rear right wheel on Audi A4/S4/RS4 B9 vehicles. The source states PETG printing, supports as needed, and two small self-tapping screws for retention. Attribution required under the source CC BY 4.0 license.

Fits A4 · B9

Full-size functional dash speaker adapter set for Audi A4/S4/RS4 B8 dashboard locations, sized for 75 mm speakers. The source supplies side and centre STL variants; print two side adapters and one centre adapter. The creator states that the part works with PLA and PETG. Verify the vehicle opening, speaker dimensions, mounting holes, clearance, and secure fit before use.

Fits A4 · B8

Left and right replacement hinges for the Audi A4 glove-box door, fitment evidenced for the 2004–2008 A4 B7 generation. The design is attributed to NikiKaccia and the original Thingiverse listing is CC BY-SA 4.0; any catalog rehosting must preserve attribution and ShareAlike. The source lists standard FDM settings of 0.2 mm layers and 70% infill, with supports as needed. Verify dimensions and fit before printing or installation.

Fits A4 · B7

Front-door adapter bracket for mounting a 5.25-inch / 130 mm speaker at the factory mounting locations. The source includes a separate flexible seal file; mirror one bracket for the opposite door. The creator specifies four M3 threaded inserts, four M3 button-head screws, and three OEM mounting screws per bracket, and recommends ABS, ASA, or similar temperature-resistant filament for the bracket and TPU or similar flexible filament for the seal. Exact source fitment is 1994–2001 Audi A4 B5.

Fits A4 · B5