Model X

Vehicle-specific wireless Qi charger assembly for Tesla Model S and Model X, designed for an IKEA LIVBOJ charger.

Fits Model S · First generation · Model X · First generation

Mechanical lock for the J1772 adapter; creator states it works with Model S/X flange adapters and Model 3/Y.

Fits Model 3 · First generation · Model S · First generation · Model X · First generation +1

I made a coat hook for the new refreshed (2021+) Tesla Model X seat. The original Tesla hooks (https://shop.tesla.com/product/2012-2020-_-model-s_x-coat-hooks) only work on older cars. Inspired by the original, I made a new one that will fit on the plastic cover of the seat. It should be printed on PETG or ABS, since PLA can deform in higher temperatures.

Fits Model X · First generation

Based on Motorpixiegmibals model - Extend the bottom to fit Tesla Model S and X - Printed in Bambu P1P - Using PLA - Printed in 24m - with Raft

Fits Model X · First generation

This is a wireless magsafe charger for a Tesla Model X (before the 2020 refresh). It fits nicely in the phone slot in the center console of the Model X. I've tested it in a 2019 Model X and with both an Iphone 14 pro and 13 pro. To make this, you will need the following: 1. A puck-style magsafe wireless charger. The one I chose is https://www.amazon.com/dp/B0B6ZK81WH . If you choose another wireless charger, you may need to alter the model to fit your charger. 2. Hot-glue. 3. One of the included model files. (Both are the same, I just provided multiple formats) I printed the model face down on a glass bed with support. After printing, simply glue the charger in place and glue any excess wire out of the way. This model was inspired by this product that I saw online: https://greenmissionstore.com . I didn't buy their charger, but I thought I would give them a shout-out.

Fits Model X · First generation

This is an adapter to make the trailer hitch socket on the Tesla Model X more accessible. In addition to this adapter, the following items are required: Company Hella 8JA 005 951-001 Company Hella 8JB 005 949-012 Cable 13-pin 2,5mm² 3 cylinder head screws M5x40mm 3 hexagon nuts M5

Fits Model X · First generation

I needed a headrest mount for my kids' various devices which actually fits the quite special Tesla headrest. This is a remix of https://www.thingiverse.com/thing:2255304 (attach to headrest) and https://www.thingiverse.com/thing:2986970 (universal tablet holder). The holders have been in use for the past 2 years now, holding everything from IPad to Switch to Books … ## Instructions (copy/pasted): Since I mainly remixed parts, best explanations can be found with the original items: ### [Headrest](https://www.thingiverse.com/thing:2255304) *The tiltable version needs a M10 hex nut and a bolt.* *Needs to be printed in two/three parts, and glued together.* *Glue the vertical beam on the exact middle point of the horizontal beam.* ### [Tablet Mount](https://www.thingiverse.com/thing:2986970) *It uses standard M6 bolts and nuts. It can be adjusted freely fit every rectangular piece of technology* (I added some felt-stickers to be able to make the hooks fit more tight without scratching anything)

Fits Model X · First generation

Tesla Model X buddy console storage organizer (below the center console screen) - 2 large bays (sunglasses / wallet) - 1 thin card bay I glued a rubber mat inside the bays to prevent stuff from sliding.

Fits Model X · First generation

I wanted a place to keep my sunglasses in my 2020 Tesla Model X. These clip on right above the driver and front passenger's heads and hold them in place even during strong acceleration/deceleration. Printed in Prusament PETG, 0.3mm layers, no supports. I doubt these would work well in PLA since they need to be a little bit flexible in order to get the glasses in and out of the clip.

Fits Model X · First generation

Homemade Tesla AirVent clip for mobile holders. Also added an iPhone 11 Pro Max holder that are designed for using Krussel ultrathin case on your phone. This case is 0.something mm thin, so I guess it woks good without the case as well. The airvent clip is skeewed a bit to the right (see the bottom picture) to be able to see the whole screen of your phone and not get it hidden by the steering wheel. I have printed this with 10% infill on an old Flashforge creator (not PRO) printer using ABS. Then I used superglue to mount these together. Created in Fusion360 and printed with astroprint.

Fits Model X · First generation

My wife created some custom seat back covers for my 2020 Tesla Model X. These are the new seats with fixed head rests. To keep the covers attached, I 3D printed these small hooks. You can see them in the picture; I slide them onto the edge of the hard plastic part of the seat back, over the stretched cover, and they hold the cover in place very well. Printed in Prusament Black PETG, 0.3mm layers.

Fits Model X · First generation

Modified the model X wireless charging dock on thingiverse for a larger faster charging pad. At first I thought that I slanted it enough but even with just the long range model my note 10+ would flop off during fast acceleration. Just added a snap on cover for it now for acceleration proof. :) tesla_x_phone_charger.stl is the snap on cover for Note 10+ without case. tesla_x_phone_charger2.stl is snap on cover for phones with case.

Fits Model X · First generation