XC60

Flexible replacement insert for the rear-seat armrest drink holder. It restores the retaining tabs that hold smaller-diameter drink bottles, using a press-fit insert that can be secured with clear silicone; trim remnants of broken original tabs before installation. The documented applications are V60 2015, V70 2008-2010, XC60 2010-2017, and XC70 2008-2014 within the corresponding live catalog generations. Print with flexible TPU; the insert may remain removable when larger containers are needed.

Fits V60 · First generation · V70 · Third generation · XC60 · First generation +1

Replacement battery-cover retaining clip for Volvo P3-platform vehicles. Restores battery-cover retention when the original clip breaks or loses holding strength. Verified fitment includes second-generation XC70, second-generation S80, and first-generation XC60. PETG is recommended for durability and temperature resistance; verify the battery-cover variant, clip engagement, clearances, and secure retention before use.

Fits S80 · Second generation · XC60 · First generation · XC70 · Second generation

Flexible TPU rubber mount/bushing for securing an engine cover. The cylindrical insert provides a compliant locating and isolation interface at the engine-cover mounting opening. Fitment covers the live S60 I/II, V70 II/III, S80 I/II, XC70 I/II, XC90 I, C30, C70 II, S40 II, V50 I, V40 II, V60 I, and XC60 I generations listed below; verify engine variant, dimensions, quantity, and retention before installation.

Fits C30 · First and only generation · C70 · Second generation · S40 · Second generation +13

Three-pocket insert for the center-console cavity immediately before the cupholder. One pocket retains a key fob, the central pocket holds a phone, and a third pocket stores another small item. The insert locks under the cavity lip to reduce wobble and is sized for a phone about 15 mm thick. It fits the second-generation Volvo V60 and XC60 center-console cavity; verify phone and case thickness, trim variant, retention, clearances, and cabin-temperature material suitability before installation.

Fits V60 · Second generation · XC60 · Second generation

Functional full-size console cup holder for Volvo V60/V90/XC60/XC90 SPA applications, scoped here to Volvo XC60 second generation (live generation 1755). The creator says it is for aluminium cans and states "Print in PETG." Two original STL files are included. Hybrid-model fitment is explicitly uncertain; verify the console, variant, clearances, retention, and print strength before use. Source rights are CC BY-SA: preserve attribution and ShareAlike terms.

Fits XC60 · Second generation

Full-size replacement fuel-line pipe clip for the Volvo XC60 First generation (2008-2017), based on the creator's statement that a friend's Volvo XC60 fuel-line clip broke and this design was made as a replacement. The creator specifies PETG, 50% infill, and supports. Verify the exact vehicle generation, fuel-line routing, clip retention, hose diameters, heat and chemical exposure, print orientation, and clearance before installation or road use. Attribution, noncommercial use, and ShareAlike restrictions from the source apply exactly.

Fits XC60 · First generation

Full-size functional Samsung tablet stand for the first-generation Volvo XC60 dashboard center-vent/center-stack area. The creator describes a 10-inch Samsung tablet, charging capability, no panel editing or damage, easy installation/removal, and required support. Source photos show the printed stand installed around the XC60 center vents. Verify tablet and case dimensions, retention, charging-cable routing, visibility, vent airflow, hazard/control access, and clearances before use. PETG or ABS are engineering-inferred for cabin heat resistance because the source does not specify filament. CC BY-NC attribution and noncommercial restrictions apply.

Fits XC60 · First generation

Functional two-file cup-holder insert for P3 Volvo XC60/S60, source-stated 2011-2017 fitment. The source images show the printed ring installed in the center-console cup-holder location and retaining a beverage can. Verify model year, chassis/console variant, fit, retention, clearances, and material suitability before use. The creator did not specify filament; PETG is engineering-inferred for cabin heat resistance. CC BY attribution terms apply.

Fits S60 · Second generation · XC60 · First generation

Low cup-holder insert for a Volvo XC60 II; the source says the cup-holder latch can still close.

Fits XC60 · Second generation

Driver-door waste basket for a left-hand-drive Volvo XC60 II; the source describes use in a 2022 XC60 Recharge.

Fits XC60 · Second generation

Base for mounting a wireless charging station ahead of the gear selector in a 2018-and-later Volvo XC60.

Fits XC60 · Second generation

Phone-holder support with a 17 mm ball interface for a 2019 Volvo XC60.

Fits XC60 · Second generation