Find your next part.

Replacement retaining pin for the lower body panel of an Alfa Romeo 156. PETG is recommended here for vibration, impact and moisture resistance; ASA or ABS are alternatives for sustained exterior heat and weather exposure.

Fits 156 · Tipo 932

Replacement 50 mm center cap for alloy wheels using OEM 60652886. The source recommends printing solid PETG because its PLA retaining clips broke, and the photographed part accepts a separate 50 mm emblem. Confirm the wheel opening and original cap diameter before installation. The single-cap STL is supplied; the optional four-cap print plate and editable SketchUp source remain preserved in the audit archive.

Fits 145 / 146 · 145 / 146 (Tipo 930) · 147 · Tipo 937 · 156 · Tipo 932 +6

Two-piece replacement for a bonnet stay-rod holder, comprising the main support block and its retaining clip. The source identifies OEM references 7622907 and 60810130 and explicit Alfa Romeo 145/146 fitment. The creator printed both pieces in PLA at 0.2 mm layers with supports; PETG is additionally recommended here for engine-bay heat and snap-tab durability. Compare both pieces with the originals before installation.

Fits 145 / 146 · 145 / 146 (Tipo 930)

Non-functional blanking cover for the front-bumper opening left when the headlight-washer piece is missing. The creator designed it from a 1992 Alfa Romeo 164 V6 2.0 Turbo and explicitly warns that it does not function as a washer nozzle; verify the opening dimensions before fitting.

Fits 164 · Tipo 164

One-millimetre shorter-arm remix of the windscreen washer-nozzle clip for a Tipo 916 GTV wiper assembly. The creator states that the original geometry did not retain the sprayer securely on their GTV and shortened the secondary arm by 1 mm; use this variant only when the source clip is loose and compare against the original before fitting.

Fits GTV · GTV (Tipo 916)

Replacement clamp for securing the triangular washer pipe to the windscreen-wiper assembly. The creator printed and test-fitted it on a Tipo 916 GTV 2.0 V6 and recommends ABS for resistance to sun and weather; compare the original clamp and hose routing before installation.

Fits GTV · GTV (Tipo 916)

Protective cover for the windscreen-wiper arm retaining nut on a Type 116 GTV6. Confirm nut clearance and secure engagement before driving.

Fits GTV · Alfetta GT / GTV / GTV6 (Tipo 116)

Replacement center cap for a 4×98 Ronal A1 wheel used on Type 116 GTV models. Confirm the wheel model, center-bore dimensions and retention fit before road use; the included STL is the directly printable source variant.

Fits GTV · Alfetta GT / GTV / GTV6 (Tipo 116)

Replacement bracket for the bonnet prop on Type 116 GTV/GTV6 models. The creator printed it in ABS and installed rivet nuts in the original mounting holes so the bracket can be retained with M6 flat-head hex screws; verify mounting security before working under the bonnet.

Fits GTV · Alfetta GT / GTV / GTV6 (Tipo 116)

Remixed headlamp alignment cup narrowed by 5% and modified to accept both rectangular and round headlamp pins for Alfetta GT, GTV and GTV6 applications. Compare the pin form and adjustment range with the original before installation.

Fits GTV · Alfetta GT / GTV / GTV6 (Tipo 116)

Replacement lateral support for the rear bumper of a 1979 Alfa Romeo Alfetta Berlina. Compare the source geometry with the original side and mounting points before installation; the creator identifies the year but does not state whether the design is left/right-specific.

Fits Alfetta · Berlina (Tipo 116)

Two source-provided clip geometries for retaining the windscreen-washer nozzles and hose on Tipo 916 Spider and GTV wiper assemblies. Compare the original clip location and hose routing, then select the matching source variant before installation.

Fits GTV · GTV (Tipo 916) · Spider · Tipo 916

Replacement insert for the B-pillar rubber seal moulding used on Tipo 916 Spider and GTV models. The creator specifies three printed copies per seal assembly, 0.28 mm layers, no supports and 100% infill; print the source file three times and test the rubber-mould engagement before final installation.

Fits GTV · GTV (Tipo 916) · Spider · Tipo 916

Two creator-provided headlight dust-cap variants for driving-light or longer LED-bulb clearance: a closed cap and a version with a 22 mm cable opening. The source explicitly states fitment for Alfa Romeo 159, Brera and Spider. Check bulb heat, cable sealing and cap engagement before use.

Fits 159 · Tipo 939 · Brera · Tipo 939 · Spider · Tipo 939

Two-hole replacement block for the door area of a classic Spider Duetto. Compare the mounting-hole spacing and installed orientation with the original part before use.

Fits Spider · Series 1 (Tipo 105 / 115)

Replacement flexible cap fitted between the windscreen-wiper arm and retaining nut on 1970s Alfa Romeo Tipo 115 Spiders. Check pivot clearance and secure wiper-arm retention before use.

Fits Spider · Series 2 (Tipo 105 / 115)

Longer and less bulky interior-mirror attachment variant for the creator’s Giulia phone-mount system, providing additional adjustment range.

Fits Giulia · Tipo 952

Adapter for mounting a Sony Xperia Z5 Compact at the interior-mirror location. It is the phone-side companion to the creator’s Giulia mirror attachment.

Fits Giulia · Tipo 952

Flexible replacement floor bung or blind grommet for 1960s–1970s Alfa Romeo Tipo 105 and 115 vehicles. Print in TPU and verify the opening size and retention before road use.

Fits 1750 / 2000 Berlina · 1750 Berlina (105.48) · 1750 / 2000 Berlina · 2000 Berlina (105.12) · Giulia · Tipo 105 / 115 Berlina +6

Three attachment joints for bonding inside a right-side aftermarket mirror cap. The creator specifies Alfa Romeo Giulietta fitment and epoxy adhesive. Right side only; dry-fit every joint, prepare bonding surfaces correctly, and verify the cap remains secure.

Fits Giulietta · Tipo 940

Left- and right-side spacers that provide clearance for protruding LED high-beam cooling hardware while retaining the original rear headlamp covers. The creator requires silicone sealing. Use heat- and weather-resistant material and verify both covers remain secure and watertight after installation.

Fits Giulietta · Tipo 940

Replacement fog light housing.

Fits 944 · 944

Replacement shift boot and fader covers.

Fits 944 · 944

Replacement abschlepphaken abdeckung tow hook cover.

Fits 944 · 944