Find your next part.

Replacement clip for retaining the rear lamp reflector on a BMW E34 when the small fastener is damaged but the reflector assembly remains serviceable. The source shows the original lamp hardware and recommends PETG with tree supports. Compare the clip pocket and reflector condition before installation; no parent lamp number is assigned.

Fits 5 Series · E34

Thread-forming replacement cap for the roof telephone antenna on an E34 Touring. The creator printed it in PETG, formed the thread with gentle heat and painted the physical part satin black. This is body- and antenna-option-specific; confirm the Touring roof fitting and thread diameter before heating or installation.

Fits 5 Series · E34

Replacement internal clip for E32/E34 headlamp adjusters using the M5×0.8 bolts in headlamp assemblies 63121394252 and 63121378368. Those numbers identify the surrounding assemblies rather than the printed clip, so they are not assigned as OEM numbers. Reuse sound adjuster bolts and verify beam aim after installation.

Fits 5 Series · E34 · 7 Series · E32

Replacement plastic retaining clip for the classic 14-inch steel wheel cover used on early BMW E28 cars. BMW catalogs identify the clip as 36131125740, used with wheel cover 36131125718 through September 1984; it is discontinued with no cataloged supersession. Verify the wheel-cover style and production date before use, and inspect every clip for secure retention.

Fits 5 Series · E28

Three-piece replacement bracket set for the BMW E28 front lower valance: left, center and right. The creator states that the parts fit in the stock locations and replaces factory brackets that commonly break or go missing. Use a UV- and heat-resistant engineering material, verify the valance variant and compare the mounting-hole geometry before fitting.

Fits 5 Series · E28

Left and right replacement brackets for retaining the metal badge inserts in BMW G20/G21-family all-weather floor mats. The creator reports iterative fit testing and explains that the metal tabs pass through the bracket openings before the bracket is press-slid into place. Use PETG or ABS, fit only to the mat badge area, and verify the mat remains fully anchored with no loose piece or raised edge near any pedal before driving.

Fits 3 Series · G20 / G21 / G28 / G80 / G81

I used petg for this use organic supports Use fluid-, heat- and UV-resistant material and verify full wiper and washer clearance.

Fits 3 Series · E90 / E91 / E92 / E93

Just a replacement washer fluid reservoir cap for a BMW E92. Insert included if you would like to print in a contrasting colour. Recommend printing upside-down, flat on the print surface. I know these are cheap to buy but “I can 3D print that!” Use fluid-, heat- and UV-resistant material and verify full wiper and washer clearance.

Fits 3 Series · E90 / E91 / E92 / E93

Adapter for side led blinker - bmw e90 Use automotive-rated wiring and connectors, retain fuse protection, insulate every terminal and verify unobstructed operation.

Fits 3 Series · E90 / E91 / E92 / E93

Hello, since the OEM handle was so expensive i decided to create my own. Let me know what you think. Supports are needed, i used roof support as well. WARNING be careful removing the supports you can break the top sections. Replacement part for OEM BMW handle. Part Number: 51477152356. Supersession(s): 51-47-7-152-356 (This product fits 123 vehicle variants. BMW: 12 models, 123 variants between 2004 and 2013.) BMW E90 Trunk Handle Replacement 2004-2013 by blackjet123 is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. First Thingiverse make! Let me know if i missed any useful information. Use exterior-rated material and verify secure retention and adjacent-panel clearance.

Fits 3 Series · E90 / E91 / E92 / E93

Use exterior-rated material and verify secure retention and adjacent-panel clearance.

Fits 3 Series · E90 / E91 / E92 / E93

The is a model of a BMW E90 plastic nut. These nuts are used in the undertray, splashguard and several other places in the vehicle. The nut itself is unthreaded since it is screwed onto a thread cutting fastener. The inner diameter of the nut is 4.25mm. The nut fits a 10mm wrench. Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed operation.

Fits 3 Series · E90 / E91 / E92 / E93

This is my first 3D design. I needed this to plug holes in my bumper without buying parking sensors. It fits nicely, although I used some epoxy glue to be sure it stays in. Use exterior-rated material and verify secure retention and adjacent-panel clearance.

Fits 3 Series · E90 / E91 / E92 / E93

12.03.2019 2mm wider version added. it is suitable for 2005-2009 e90/e91 BMW. it is right side, but you may mirror the item by using Cura's x or y axis mirroring feature. i did not test for left side. But it should be. 3D PRINTING SETTINGS infill %15 layer 0.20mm 0.80mm, perimeter 2, 0.4mm nozzle Please share your photos, i will appreciate to you, it is really important for me. Confirm body and lamp variant, secure retention, weather sealing and legal lamp operation before driving.

Fits 3 Series · E90 / E91 / E92 / E93

Here I leave the headlight cover, located on the mudguard of the front wheel, is a piece very easy to lose and so I leave here the model to be able to print the fleeces own covers. Mine is already 1 month and I have not lost it or left, my BMW is an E91, but I think it serves in all E90 series. I leave the files in solidworks if they want to improve. Good impressions !! Greetings BMW Confirm body and lamp variant, secure retention, weather sealing and legal lamp operation before driving.

Fits 3 Series · E90 / E91 / E92 / E93

The original plugs in the drain/vent of the e46 are cracking or missing, print a new one! Print it in TPU and install in the car. May be compatible with other cars of the brand but i didn't have others to try. Verify secure retention, weather sealing and legal lamp operation before driving.

Fits 3 Series · E46

I created this repair wheel for the armrest, since it most often breaks or cracks in the joint, this wheel is installed and inserted in the place where the spring was originally. (and stick there) Use cabin-heat-resistant material, dry-fit the part and confirm secure retention and unobstructed operation.

Fits 3 Series · E46

Print these to fix the broken boot handle on your BMW. Theyre designed so they squeeze in the holes, creating some tension to be able to screw the handle to the car. The “center” ones are for the 2 center bolts, the “side” ones for the outer ones. Fits nice and neat on my 2003 e46 Touring, may need some slight adjusting but worked well enough for me. Use exterior-rated material and verify secure retention, sealing and adjacent-panel clearance.

Fits 3 Series · E46

When I bought some roof rails, the flaps for the screws to not scratch the paint had been broken off. So I threw this quick redesign together. It's mostly a replica with slight adjustments for better printing. DO NOT USE PLA, PETG, OR ABS You should consider a high-quality, very weather and outdoor-resistant filament. I used CPE CF112. Alternatives may include PA CF12 or PP. Print slow. Low to no fan. The chamber should be at least 40°C for best layer adhesion. Works best with 100% infill. Sadly I could not find the specific part number for this, I've heard a simple washer should do just as well. However, I'd like to keep it as original as possible with this, as it also helps with alignment. Use exterior-rated material and verify secure retention, sealing and adjacent-panel clearance.

Fits 3 Series · E46

So I broke my wiper clip while replacing some other stuff on the car. There's not really a viable/economical replacement and original part does not take well to super glue. I started from another STL and modeled over it in fusion. Then did a couple of test prints and iterated as I went. Depending on your tolerances, filament, and shrinkage, you may have to fiddle with the final dimensions. Printed in PC-ABS. It doesn't fall off when using the windshield washing function. idk if I'd use it in a rally race. Use at your own risk. Use heat-, UV- and fluid-resistant material and verify full wiper or washer clearance.

Fits 3 Series · E46

Seals for the BMW E46 320i Touring for the roof rails. Print settings: Material: Filaflex Semisoft Supports: No Layer height: .3 Infill: 40% Use exterior-rated material and verify secure retention, sealing and adjacent-panel clearance.

Fits 3 Series · E46

Four-piece repair for the broken mounting tab on the pre-facelift E46 tail-light bulb holder. The creator physically tested it on a 1999 E46 320i with amber turn signals and documents the M6/M3 hardware and left/right external plates. Confirm body and lamp variant, secure every fastener, and verify weather sealing and legal lamp operation.

Fits 3 Series · E46

BMW E46 Headlight washer cap (left side) BMW part number: 6167.8.256.179 Verify secure retention, weather sealing and legal lamp operation before driving.

Fits 3 Series · E46

These clips can be glued in your oval mirror housing of a BMW E39 M5 or E46 M3 to repair the broken ones. Use "crazyglue" and line the clips up with the missing tabs in the housing. See photos for reference. Dry-fit before fastening and verify glass, latch, wiring and trim clearance through full operation.

Fits 3 Series · E46 · 5 Series · E39