Find your next part.

Replacement hood-mounted clip for the prop rod on a 1997 Wrangler TJ, with the round hood-hole mount verified by the creator.

Fits Wrangler · TJ

Replacement mounting bracket and pivot pin for the factory Hella fog light used on 2004–2006 Wrangler TJ models, supplied as both a one-piece print and a reinforced multipart option.

Fits Wrangler · TJ

Quarter-turn threaded replacement floor plug tested in a 1998 TJ. The slot accepts a US quarter as an installation tool.

Fits Wrangler · TJ

Replacement nut clip for the screws that secure the TJ's chrome headlight trim ring when the original clips strip.

Fits Wrangler · TJ

Replacement end cap for the stock 1997–2006 Wrangler TJ front bumper. Two copies complete the bumper.

Fits Wrangler · TJ

Replacement end cap for the stock 1997–2006 Wrangler TJ rear bumper. The creator test-fitted the design on a European-market TJ.

Fits Wrangler · TJ

Two-piece replacement for the heat-damaged European-market license-plate light mounting and outer cover, designed around LED illumination on a 2004 Wrangler TJ.

Fits Wrangler · TJ

Paired stops that fit around the mirror-arm mounting nuts to limit mirror movement. The creator installed ABS prints and provides fitting cautions for seating the nut without overloading the part.

Fits Wrangler · YJ

Two low-profile front turn-signal housings for LED conversions, with 12-by-12 and 20-by-20 heatsink openings. The creator installed the design to gain intercooler clearance while retaining the original lamp location.

Fits Wrangler · YJ

Twist-on replacement cap for the windshield-washer fluid reservoir. The source notes that reservoir use requiring a vent tube is a different configuration and was not claimed.

Fits Wrangler · YJ

Replacement door-hinge liners with separate early, later and driver-side printable variants. Source naming and year-marked files support late CJ, YJ and TJ applications.

Fits CJ · CJ-5 · CJ · CJ-7 · CJ · CJ-8 Scrambler +2

License-plate bracket with a channel for an LED strip and a separate clear printable lens. The two-part design mounts in the stock late-CJ and YJ location.

Fits CJ · CJ-5 · CJ · CJ-7 · CJ · CJ-8 Scrambler +1

Bracket for relocating a winch-controller jack into a grille slot. Exact grille spacing should be checked before drilling or wiring; speculative CJ and TJ fitment was not assigned.

Fits Wrangler · YJ

Flexible replacement gasket for a windshield-washer nozzle. The creator made it thicker than the shrunken originals and reports a good fit when printed solid in flexible filament.

Fits Wrangler · YJ

Blank snap-in center cap modelled to replace a cap on 1991 wheels. The source also preserves an editable STEP file, while the catalogue download is the printable STL.

Fits Wrangler · YJ

Spacer arm that lets a factory replacement turn-signal stalk operate the exposed washer-pump switch when the original cover is missing. The creator fitted a PETG print after light sanding.

Fits Wrangler · YJ

Mirror brackets that bolt to the existing windshield-frame fastener points. The source provides an original bracket plus left- and right-hand variants and describes the installed design as rigid and simple to fit.

Fits Wrangler · YJ

Hood Prop-Rod Retainer designed for the 2008 Toyota Highlander / Kluger (XU40). Exact 2008 fit

Fits Highlander / Kluger · 2nd Gen

Windshield Washer Fluid Cap designed for the 2001-2006 Toyota Camry (XV30). Made specifically for a 2005 Camry washer reservoir. Potential overlap with exact-number cap 3885990

Fits Camry · 5th Gen

Power Antenna Supplemental Gear Set designed for the 2001-2006 Toyota Camry (XV30). Author identifies supplemental antenna-drive gears for XV30 and links the base XV30 antenna-gear model. Complementary to 1359492, not necessarily an alternative.

Fits Camry · 5th Gen

Power Antenna Drive Gear designed for the 2001-2006 Toyota Camry (XV30). Source explicitly identifies the antenna gear for Camry XV30.

Fits Camry · 5th Gen

Hood Prop Rod Clip 9 mm designed for the 1996-2001 Toyota Camry (XV20). Author modified a Toyota clip to accept the 9 mm prop rod on a 1997 Camry. Alternate design to 2987695

Fits Camry · 4th Gen

Center-Console Armrest Bumper Pair designed for the 1996-2001 Toyota Camry (XV20). Modeled from the two center-console armrest stops on a 1999 Camry XLE. Source mentions diagram callouts 58964/58965A, not complete Toyota part numbers

Fits Camry · 4th Gen

Headlight Mounting Bracket designed for the 1996-2001 Toyota Camry (XV20). Author specifies 1998-2001 SXV20/MCV20, reports it tested, and specifies an M6 screw. Use this tested record rather than duplicate-like 5173993.

Fits Camry · 4th Gen