Find your next part.

Outer bushing that fits a Hi-Lift jack climber rung around the Rampage carrier bolt to suppress rattling. The creator states JK and JL fitment.

Fits Wrangler · JK · Wrangler · JL

Cupholder that uses the stock windshield-mount-plate holes on late CJ and YJ vehicles without the factory dash pad. It is sized for a mug with a carabiner handle and the creator test-fitted a PETG print.

Fits CJ · CJ-5 · CJ · CJ-7 · CJ · CJ-8 Scrambler +1

Flexible gasket that seals between the rectangular taillight housing and lens. The source specifies TPU and the mounting pattern is documented across late CJ, YJ and TJ applications.

Fits CJ · CJ-5 · CJ · CJ-7 · CJ · CJ-8 Scrambler +2

Hood Prop Rod Retaining Clip designed for the 1996-2001 Toyota Camry (XV20). Remixed specifically for the larger hood prop on a 1997 Camry and reported usable.

Fits Camry · 4th Gen

A printable headlamp bulb dust cover documented by the original creator for E12 Corolla Toyota Corolla fitment. Use heat-resistant material and confirm lamp type.

Fits Corolla · 9th Gen

A printable hood prop-rod grommet documented by the original creator for 2012 Toyota Prius fitment. Fit evidence is specifically a 2012 Prius.

Fits Prius · 3rd Gen

Replacement mounting base that uses the original roof-hole pattern to install a functioning dome light, designed from a 1988 pickup.

Fits Hilux · 4th Gen

Block-off plate for sealing the unused air-conditioning openings in the firewall, designed from a 1987 pickup.

Fits Hilux · 4th Gen

Replacement centre cap for the original alloy wheel.

Fits Land Cruiser Prado · 90 Series

Replacement internal drive gear for the powered radio antenna assembly.

Fits Land Cruiser · 100 Series · Lexus LX · 470

Replacement latch for the fuel-filler door.

Fits Land Cruiser · 80 Series · Lexus LX · 450

Replacement release lever for the lower tailgate, supplied with editable STEP source. The spline fit may need adjustment for individual printers.

Fits Land Cruiser · 80 Series

Replacement cap for the windscreen-washer reservoir.

Fits Freelander · 2

No-drill rear-camera holder that replaces one number-plate-light position. Confirm camera dimensions, cable routing, and local lighting requirements before installation.

Fits Freelander · 1

Replacement push clip for the front cowl and wiper-panel cover on 2002–2009 vehicles. Use a flexible, weather-resistant material and compare dimensions with an original clip before fitting.

Fits Range Rover · L322

Replacement quarter-turn screw for retaining the rear-bumper towbar access door when the towbar is not fitted. Print with high infill and confirm engagement before road use.

Fits Discovery · 3

Replacement flexible cap for the windshield-washer fluid reservoir filler neck on the Ford Focus MK3 1.5 TDCi, covering the 2011–2018 third-generation application. It restores the removable cover over the washer-fluid tank opening; TPU is specified for the flexible printed part.

Fits Focus · Third generation

Reinforced load-bearing insert for the vehicle's OEM jack recess and lift point. It increases contact area for a workshop jack or lift adapter and uses structural ribs to resist shear. Recommended printing uses PETG with 100% infill and four perimeters; ABS/ASA are alternatives. Verify flush fit and inspect the print before applying a full load.

Fits Fusion · North American second generation · Mondeo · Fourth generation

Driver-side replacement clip for the mirror-mounted puddle light/lamp on 2015–2023 Mustang vehicles. It restores retention after the original clip breaks; installation involves trimming the remaining original clip, test-fitting the replacement, and optionally securing it with adhesive or epoxy. One driver-side component is included; no passenger-side version is provided.

Fits Mustang · Sixth generation

Full-size front grille for the Ford Sierra Mk2 Cosworth front end, supplied as two vertically split halves intended to be joined at the center; an optional screw can add stability. Use restriction: Personal use only; do not sell, reupload, modify, or remix the file.

Fits Sierra · Sierra

Rubber hood stop bumper that mounts at the radiator support to cushion and locate the hood and help prevent movement and rattling. Verified for 1992-1996 Bronco and F-150, F-250, and F-350 applications.

Fits Bronco · Fifth generation · F-Series · Ninth generation

Replacement protective cap for the rear wiper arm, covering the exposed arm hardware at the rear window. Intended for the 2013–2021 Qashqai/Dualis J11 generation (North American Rogue Sport application); verify arm geometry, retention, and clearance before use.

Fits Qashqai / Dualis · J11

Four-piece set of printed repair components that restores the mounting points on a rear hatch handle by replacing broken internal clip blocks and reusing the original handle hardware. The set includes left- and right-side clip components plus inner and connector pieces for the Qashqai / Dualis J10 (2006-2013) application. The printed parts are bonded to the original handle and require fit checking before installation.

Fits Qashqai / Dualis · J10

Two-piece mounting set for a rear wing, comprising a trunk-mounted wing mount and a separate stand component. Intended for the Nissan 350Z Z33 (2002-2009) and an APR GTC-500 wing; the mount uses two M8 threaded inserts beneath the wing at the rear trunk. Verify dimensions, fastener engagement, and structural suitability before installation.

Fits Nissan Z / Fairlady Z · Z33