Find your next part.

Two-piece mounting set for a rear wing, comprising a trunk-mounted wing mount and a separate stand component. Intended for the Nissan 350Z Z33 (2002-2009) and an APR GTC-500 wing; the mount uses two M8 threaded inserts beneath the wing at the rear trunk. Verify dimensions, fastener engagement, and structural suitability before installation.

Fits Nissan Z / Fairlady Z · Z33

Full-size replacement wheel center cap for the 2002–2009 Nissan 350Z (Z33) application. It covers the center opening of a compatible alloy wheel and carries a raised Nissan emblem. Verify the wheel package, cap dimensions, retention, and clearance before installation; use a heat-resistant material suitable for wheel service.

Fits Nissan Z / Fairlady Z · Z33

Replacement left- and right-hand rear cargo-cover hooks for Nissan X-Trail T30 vehicles from 2000-2007. The source set provides four handed and position-specific STL variants for retaining the retractable boot/tonneau cover at the rear interior side panels. Print the applicable variant or variants, compare the mating profile with the original, and verify side, fit, retention, clearance, and material suitability before installation.

Fits X-Trail · T30

Replacement cover for the rear window wiper arm using the 28782-ED500 interface. Verified fitment covers Nissan Juke F15, Tiida C11, X-Trail/Rogue T32, Pulsar C13, and Kicks P15 where that exact rear cover is used. The single-piece cover replaces the original outer cap; the design notes that the lower spikes may need slight trimming to ease installation.

Fits Juke · F15 · Kicks · P15 · Pulsar · C13 +2

Vented rear cap for the headlight housing on 2006-2008 Subaru Forester SG facelift applications. It provides extended clearance for H1-size aftermarket LED low-beam bulbs with rear cooling fans, vented louvers for airflow, and an external wire slot for the voltage-box lead. The same cap fits both sides; reuse the stock O-ring and print a pair. Full waterproofing is not guaranteed, so verify bulb tail depth, cap-tab engagement, clearances, and sealing before installation. Print in ASA or another heat- and UV-resistant automotive material.

Fits Forester · Second generation (SG)

Four-piece flush-mount auxiliary-light housing and retainer kit for the front bumper fog-light openings of 2006–2008 Forester Sports (SG facelift) vehicles. The kit comprises left and right housings plus left and right retainers, accepts a compatible small pod using a single through-bolt bracket, and allows vertical and horizontal beam aiming. Includes the printed housings and retainers; light pods, relay, switch, connectors, heat-set inserts, and fasteners are separate. Verify pod dimensions, wiring, clearances, weather sealing, print strength, and local lighting regulations before installation.

Fits Forester · Second generation (SG)

Replacement left- and right-side covers for the front headlight-washer nozzle openings. The side-specific files fit Subaru Legacy IV sedan and station wagon applications from 2003-2009 and Subaru Outback III applications from 2003-2009, including the Outback sedan from 2004-2009. The left and right covers correspond to OE identifiers 86636AG260 and 86636AG250; select the file matching the vehicle side. Use a heat- and weather-resistant material suitable for exterior automotive service.

Fits Legacy · Fourth generation (BL/BP) · Outback · Third generation (BP)

Pair of full-size left- and right-side headlight-washer nozzle covers for the front bumper of the 2009–2014 Subaru Legacy BM/BR. The separate covers replace missing exterior caps over the headlight-washer outlets; verify nozzle tabs, bumper opening, side orientation, and paint or finish before installation.

Fits Legacy · Fifth generation (BM/BR)

Full-size replacement front fog-light mounting bracket assembly for 2021-2023 Subaru Crosstrek applications. The kit includes a tester bracket, base bracket, adjustment arm, optional adjustment-arm insert for an M5 x 70 mm screw, and alternate long or shallow fake-light bodies in standard, realistic, and stylized forms. The base bracket retains the fog light in the bumper receptacle; the adjustment arm accepts the stock plastic adjustment screw or optional M5 hardware. Print the base bracket with supports. PETG is the creator-specified material, and post-processing may be needed for the adjustment components. Verify the tester bracket before printing the final assembly and confirm trim, lamp, fastener, clearance, retention, and road-use requirements.

Fits XV / Crosstrek · Second generation (GT) · XV / Crosstrek · Third generation (GU)

Full-size replacement hood support-rod retaining clip for the 2011-2016 Subaru Impreza (GJ/GP) represented by generation 1199. It secures the hood prop rod in its retaining position. Print in PETG at 100% infill as specified for the model, and verify rod diameter, clip engagement, hood clearances, and secure retention before road use.

Fits Impreza · Fourth generation (GJ/GP)

Larger headlight cover for 2003-2005 Subaru Impreza GD/GG Blobeye headlight assemblies when LED lights are installed. Reuse the original seal rings. The model provides one cover; use an automotive-temperature filament appropriate for the installation environment.

Fits Impreza · Second generation (GD/GG)

Flexible replacement grommet that retains the hood support rod at the front hood mounting point. Verified applications include the listed Impreza, Legacy, Outback, Forester, and Baja generation IDs; compare the original opening and rod diameter before installation. TPU is the intended material, and this work-in-progress design should be inspected for secure retention before vehicle use.

Fits Baja · First and only generation (BT) · Forester · First generation (SF) · Forester · Second generation (SG) +11

Full-size adapter for mounting a compatible reverse camera in the rear license-plate-light opening of the Volvo V70 Third generation (2007-2016). The model is the printed adapter geometry; the camera, lamp hardware, wiring, and display are separate components. Verify the camera dimensions, mounting points, lamp opening, connector and wiring, clearances, sealing, and image orientation before installation, and use a weather- and heat-resistant material suitable for exterior automotive service.

Fits V70 · Third generation

Two-piece full-size replacement headlight mounting bracket for the second-generation Volvo XC90 (2015-present). The printed parts provide mounting interfaces for the headlamp assembly; verify the vehicle side, headlamp/trim variant, clearances, retention, and installation hardware before fitting. Use a heat- and weather-resistant material appropriate for the installation environment.

Fits XC90 · Second generation

Full-size replacement clip for securing the door weather seal to the door aperture on the first-generation Volvo S90 (2016-present). The clip restores retention of the seal; verify the exact seal profile, clip orientation, fit, and secure door operation before installation. PETG is the creator-specified print material.

Fits S90 · First generation

Replacement protective cover for the detachable tow-bar receiver holder on Volvo V70 Second generation (2000-2007) and Volvo XC70 First generation (2000-2007) applications using the matching cover interface. The cover replaces a lost or damaged original, attaches to the existing holder, and includes a screw-and-nut retention provision to help prevent loss. Use a temperature-resistant material such as PETG; confirm the tow-bar/bumper variant and holder interface before installation.

Fits V70 · Second generation · XC70 · First generation

Replacement side hook/clip for the retractable cargo cover in the first-generation Volvo V50. The tested part retains the cover in the side-panel recess; the supplied geometry is for the passenger side, and the driver-side counterpart is produced by mirroring it. Print in PETG or another heat-resistant material; PLA may deform in hot summer conditions. Verify side orientation, fit, retention, and support-removal clearance before installation.

Fits V50 · First generation

Full-size rear reverse-light adapter set for installing a rotatable H7 LED bulb in the P2 reverse-light housing used by the Volvo V70N and first-generation XC70. The set includes the adapter, washer, and two lid variants with different hole sizes. Verify the exact socket and bulb dimensions, retention, heat resistance, sealing, clearance, and road-use legality before installation.

Fits V70 · Second generation · XC70 · First generation

Replacement twist-lock fastener set for securing an exterior rear-window louver to the rear glass on Volvo 740 vehicles from 1984–1992. Includes a locking plate and locking nut; use the matching pair to retain the louver and verify the glass, accessory bracket, clearances, and secure engagement before driving.

Fits 740 · 740

Front license-plate adapter for a Swiss 30 x 8 cm plate on the Volvo EX30 First generation (2023-present). It reuses the original center screw, requires no front-end modification, and provides a standard M6 thread for the plate frame; installing it leaves four original mounting holes visible, which may be covered separately. Print with tree supports as directed and verify plate-frame clearance, screw engagement, retention, and exterior heat/weather suitability before driving.

Fits EX30 · First generation

Full-size replacement headlight-washer cover for the 2006 Volvo S60 first generation. The cover fits over the front-bumper headlight-washer nozzle; the corroborating source notes that supports under the clips are required and reports testing in PETG (spelled "PTEG" in the indexed note). Verify the nozzle tabs and bumper fit before installation and paint to match as needed. Source: jedas, Creative Commons - Attribution.

Fits S60 · First generation

Replacement roof/load-bar pad for Volvo V70 and S60 P2 applications named by the creator. The part protects the load-bar mounting points. The creator does not specify a print material; TPU is engineering-inferred for a flexible, weather-exposed pad. Verify the carrier profile and fit before road use.

Fits S60 · First generation · V70 · Second generation · V70 · Third generation

Replacement door-handle clips for Volvo 940 and Volvo 960/S90/V90-generation applications. The creator describes the part as a replacement for Volvo 960 3.0 door handles, while the corroborating listing identifies 1991 Volvo 940 fitment and a free CC BY-4.0 STL. Remove support remnants and verify the original handle geometry, retention, clearance, and secure operation before use.

Fits 940 · 940 · 960 · 960/S90/V90

Full-size functional replacement trunk tie-down/bag hook accessory. The creator identifies fitment for the 2019 Volvo S60 and vehicles using Volvo child part 39835508; insert the stem into the trunk clip body and twist to lock it in the rectangular trunk opening. The source model was printed with PLA and recommends PETG at least or ABS for automotive use. Verify fit, secure retention, clearances, and load suitability before use; this is not a certified cargo-restraint anchor.

Fits S60 · Third generation