Find your next part.

Full-size functional replacement headlamp-washer cap holder/retainer for the first-generation Volvo S60 (2000–2009), based on the creator’s fitment statement and reported multi-year use. The source identifies original unit/retainer number 30655462, is free to download under CC BY, and requires attribution. Source-recommended materials are PETG or ASA; PETG is mapped here because ASA is not present in the active material snapshot. Verify side, nozzle/cover interface, dimensions, print orientation, heat/weather resistance, and fit before installation.

Fits S60 · First generation

3D-printable replacement pin for the headlamp horizontal-adjustment mechanism. The creator reports that the original pin can fail, leaving the headlamp rocking horizontally and unable to adjust, and reports installing the reinforced replacement on both headlights of a Volvo V40. The source listing identifies first-generation Volvo S40/V40 fitment. The mirrored print settings identify PLA; assess material suitability for automotive heat and service conditions before use.

Fits S40 · First generation · V40 · First generation

3D-printable front camera mount for the RS-style aftermarket grille sold by German Car Accessories in 2020, documented for the Audi A5/S5 B9 (F5) and specifically listed for a 2020 Audi A5. The design angles the camera toward the original Audi camera angle and clears grille elements for a 180-degree view; the source states that it uses the original Audi screws and needs no additional hardware.

Fits A5 · F5

Functional replacement cap for the front windshield-wiper-arm nut, creator-tested on a 1991 Audi 100 C4 2.0E and explicitly described for Audi 80 B4 (1991–1996), Audi 100 C4 (1990–1997), and Audi A6 C4 (1994–1997). Creator specifies ASA, ABS, Onyx, or comparable filament; ABS is the selected catalog material. CC BY-NC-SA: attribution required, noncommercial use only, and adaptations must remain under the same license.

Fits A6 · C4 · Audi 100 · C4 · Audi 80 · B4

Full-size replacement mounting clip for the 2017-2020 Audi Q5 FY headlight housing. The source reports that it was tested on the car, omits a locking tab that does not matter once the headlight is fixed, and requires two mounts per headlight. PA6-CF is the creator/platform recommended material and is mapped to the catalog Nylon material.

Fits Q5 · FY

Functional support bracket for the Audi TPMS module, mounted by the rear right wheel on Audi A4/S4/RS4 B9 vehicles. The source states PETG printing, supports as needed, and two small self-tapping screws for retention. Attribution required under the source CC BY 4.0 license.

Fits A4 · B9

Replacement mounting bracket/clip for the Audi TT 8S (MK3) side skirt/rocker panel, identified by the source as the second and third bracket positions counting from the rear wheel. The source reports that this component commonly breaks during side-skirt removal and cannot be bought separately. Creator attribution: jensrenner1980, Thingiverse thing:6208629. Source license: CC BY-4.0; retain attribution, license link, and change indication. Verify fit and fastener engagement before road use.

Fits TT · 8S

Replacement wheel-arch-liner screw for the 2004-2011 Audi A6 4F (C6). The source recommends printing lying for strength with support; it lists PA6, mapped to the catalog Nylon material.

Fits A6 · C6

Replica end cap for the hood shock on B3 Audi 80/90 Coupé vehicles.

Fits Coupé · Coupé

Hub cap for original Audi 6J × 15 Aero alloy wheels.

Fits Coupé · Coupé

Custom mounting grapple, platform, locking ring, and adapter for the auto-dimming/Homelink rear-view mirror in a 2008 Subaru Outback, intended to support a dash camera or other accessories.

Fits Outback · Third generation (BP)

Roof/drip-mould cap clip for Mazda 323F (Protege5), 1998–2003. The archive README identifies OEM part BJ3D-50-5A1C.

Fits Familia · Eighth generation

Lower radiator-grille retaining clip for water-cooled Waterboxer Volkswagen Transporter T3 / Vanagon variants. A screw expands the printed clip through the grille and body hole.

Fits Transporter · T3

Hub cap for Volkswagen Transporter T3 Syncro 16-inch applications, modeled close to OE part 251 601 151 C. The creator recommends PETG for UV stability, temperature resistance, and flexibility.

Fits Transporter · T3

Rear-hatch gas-strut prop for Volkswagen Transporter T3 / Vanagon. The supplied geometry was modeled for Lift Depot HD struts; for other struts, the creator directs users to measure and scale or modify the model as necessary. Full-size aftermarket accessory; not an OEM gas-strut replacement.

Fits Transporter · T3

Replacement hood-prop-rod clip tested by the creator on a 2001 S-10. It mounts in the radiator support's slot and hole.

Fits S-10 · Second generation

Glue-free replacement trunk cap for Fiesta VI/MK7 2012–2017.

Fits Fiesta · Sixth generation

Dash-bezel blank-panel replacement for mounting two standard automotive rocker switches using the original screws.

Fits Bronco · Fifth generation

19 mm and 21 mm adapters for operating a seized rear-light retaining hand screw.

Fits Fiesta · Fifth generation

Replacement clip retaining the cargo-cover lifting-support string.

Fits Focus · Third generation

Bracket for mounting a Vantop backup camera above the rear window.

Fits Ranger · North American third generation

Replacement retainer that screws onto a tail-light bolt to retain trunk trim.

Fits Mustang · Fifth generation

Wheel locking-nut cover for the Suzuki Jimny JB74. The source identifies the JB74 fitment and cover function.

Fits Jimny · Fourth generation

Replacement headlight adjustment clip assembly for the 2005-2010 Suzuki Swift. The source identifies the Swift fitment and provides three clip components.

Fits Swift · First global generation