Find your next part.

Replacement front-seat rail nut cap for early cars from September 1985 onward and late-model E30, copied from and physically compared with the original. BMWFans confirms covering cap 52101941999.

Fits 3 Series · E30

Replacement fastener for E30 front-seat side covers, copied from the original and physically compared. It supports stock, sport and Recaro seats; BMWFans confirms push-button 52101906933.

Fits 3 Series · E30

Reinforced fastening repair for the E30 centre-side or B-pillar trim cover, copied from the original attachment and intended to be bonded to the broken cover. The creator-listed 51431933731/732 references are parent trim covers, so no OEM number is assigned.

Fits 3 Series · E30

Dimensioned replacement glovebox damper pin for BMW E21, E28, E30, E31, E34, E38, E39, E46 and E60/E61. The creator identifies BMW pin 51161828956 and shows the physical result installed. Verify damper eye and panel thickness before fitting.

Fits 3 Series · E21 · 3 Series · E30 · 3 Series · E46 +6

Cup-holder insert for 330 ml beverage cans in BMW F22 and F87 interiors. The creator uses it in an F87 M2 and shows both the empty insert and a can seated in it. Print in PETG, ASA, ABS, or another cabin-temperature-resistant material and confirm the can remains stable without obstructing nearby controls.

Fits 2 Series · F22 / F23 / F87

Cup-holder phone stand with a Lightning-cable passage, documented by the creator for BMW F20 1 Series and F30/F31 3 Series interiors. The gallery shows the stand installed, holding phones, and routing the charge cable. Add a thin foam or rubber liner as suggested, use a heat-resistant cabin material, and confirm secure phone retention before driving.

Fits 1 Series · F20 / F21 · 3 Series · F30 / F31 / F34 / F80

Press-fit cover for the deteriorating climate-control rotary knob in a 2013 BMW F20 1 Series. The creator refined the fit through five iterations and shows the cover installed over the original knob. Use a cabin-temperature-resistant material and check that the control rotates without binding.

Fits 1 Series · F20 / F21

Two-piece replacement for the left dashboard air-vent position in a BMW E87, combining the vent housing with a round gauge/display holder. The creator's gallery shows the assembly installed in the vehicle. Confirm the instrument diameter and preserve safe driver visibility before installation.

Fits 1 Series · E81 / E82 / E87 / E88

Console cupholder adapted specifically for Comanche MJ interiors with the parking brake on the floor. Two variants provide standard beverage wells, a small-can recess, and side slots for cards or change.

Fits Comanche · MJ

Replacement interior hood-latch release handle developed for a 2001 Grand Cherokee WJ and WG after the factory handle broke.

Fits Grand Cherokee · WJ / WG

Replacement strain-relief shell for the neutral-safety-switch electrical connector on a 1998 Grand Cherokee ZJ.

Fits Grand Cherokee · ZJ / ZG

Replacement link between the HVAC blend-door actuator and lever on a 1998 Grand Cherokee ZJ.

Fits Grand Cherokee · ZJ / ZG

Replacement sun-visor retaining clip designed and used on a Grand Cherokee ZJ after the factory clip failed.

Fits Grand Cherokee · ZJ / ZG

Blank replacement panel for the 1993–1998 Grand Cherokee ZJ Vehicle Information Center or Graphic Display Module opening. The panel provides a clean base for switches, gauges, or ports.

Fits Grand Cherokee · ZJ / ZG

Segmented inserts that replace the missing extruded-rubber strips in the stainless cargo-floor moldings of a Grand Cherokee ZJ. The segments are sized for a compact printer and conceal their joints after installation.

Fits Grand Cherokee · ZJ / ZG

Replacement passenger-side interior release handle developed for a circa-1994 Grand Cherokee ZJ and installed in the vehicle. A heat-resistant cabin material and high infill are recommended.

Fits Grand Cherokee · ZJ / ZG

Replacement roller for the scissor-type window regulator used in the Grand Cherokee ZJ. Three rollers service one regulator; the creator documents heat-assisted installation over the original ball-ended pins.

Fits Grand Cherokee · ZJ / ZG

Replacement cupholder insert shaped for the Grand Cherokee ZJ center console.

Fits Grand Cherokee · ZJ / ZG

Replacement internal link that joins the driver-door window-switch button to its contact pins on a Grand Cherokee ZJ.

Fits Grand Cherokee · ZJ / ZG

Replacement internal gear for a clicking HVAC blend-door actuator in a 2010 Jeep Liberty KK. The creator installed the printed gear and reports that the actuator operates.

Fits Cherokee / Liberty · KK / Liberty

Replacement brackets and spacers that support the pop-up air dam on the sliding Sun-Rider roof fitted to a Jeep Liberty KJ. The creator modeled them from the original parts and used the printed set successfully.

Fits Cherokee / Liberty · KJ / Liberty

Replacement latch for the center-console lid on a 1984–1996 Cherokee XJ, with an orientation guide for improved layer strength.

Fits Cherokee / Liberty · XJ

Printable hand knob assembly for Wrangler JK Freedom-panel bolts. It captures an M8 × 1.25 × 75 mm bolt for tool-free panel retention.

Fits Wrangler · JK

Right-hand passenger sun-visor pivot mount modeled after the broken mount in a Wrangler JK. It allows repair without replacing the complete visor assembly.

Fits Wrangler · JK