Find your next part.

Dashboard phone mount for fitting a Quad Lock interface in the Discovery 3/LR3 cabin. Confirm the mating interface and dashboard fit before final installation.

Fits Discovery · 3

Four-part holder for installing a Webasto MultiControl unit in place of the factory ashtray, including base, bracket, front panel, and spring clip.

Fits Discovery · 3

Small friction-fit repair piece that restores the lower passenger cup-holder hinge after its moulded pins shear off. Print two

Fits Discovery · 3

Two-part replacement cover for the third-row seat release lever, with a separate pictogram insert.

Fits Discovery · 3

Replacement door-panel/card retainer stud for the Range Rover P38 and Discovery 2. Corresponds to genuine Land Rover MWC9134

Fits Range Rover · P38

Fuse cover designed for an approximately 1993 Range Rover Classic 200Tdi. Uses one M3 x 25 screw. This is the screw-retained alternative to the standard fuse-box cover.

Fits Range Rover · Classic

Fixes the plastic tabs on the A Pillar that usually break when trying to remove the trim for upgrades like UHF installs

Fits Discovery · 1

Two-piece phone-mount assembly for the large center console in 2020-and-newer Ford Transit vans. The VHB-tape mount base supports a compatible ball-head phone holder, while the removable tray provides a cleanable storage surface and access to small objects. The holder can be adjusted toward the driver or passenger, rotated between portrait and landscape, and used without screws; the source specifies support for phones up to 3.5 inches wide.

Fits Transit · Fifth generation

Replacement passenger-seat recliner handle for the 2006 Ford Explorer, fitting the seat-back recliner mechanism. It restores the lever used to adjust the seat-back angle; one current source geometry is included. Verify fit and operation before regular use.

Fits Explorer · Fourth generation

Replacement rear boot/parcel-shelf bracket that clips the cargo shelf in place near the rear seats. Intended for the Ford Focus third-generation hatchback fitment represented by generation 424 (2011–2018). Replaces a broken stock bracket as a direct replacement for the failed bracket.

Fits Focus · Third generation

Cup-holder insert for the factory center console that replaces the standard holder after removal and stabilizes a large 32 oz bottle or drink. Fits 2004-2008 F-150 flow-through consoles and 2009-2014 F-150 consoles without the flow-through configuration.

Fits F-Series · Eleventh generation · F-Series · Twelfth generation

Slide-on clip for a vehicle sun visor that holds parking tickets or other small notes. Fits the attached Ford generation IDs, including Tourneo Custom second generation from October 2023 onward. Recommended printing uses PETG, ABS, or ASA with supports, 0.2 mm layers, and 20% infill; use heat-resistant filament and avoid direct sunlight. Use restriction: Personal use only; no commercial exploitation, including resale or mass production.

Fits B-Max · B-Max · Bronco · Sixth generation · C-Max · Second generation +29

Bezel and spacer components for installing a standard 1-DIN radio or stereo in the dashboard opening of first-generation Ford Transit Connect vehicles (2002-2013). The package includes the main radio rack and a separate stand/support component; verify the dashboard variant and test-fit before final installation.

Fits Transit Connect · First generation

A removable CD-slot phone holder for the dashboard, sized for a Realme 8 Pro measuring 163.2 × 11.8 mm and similar-sized smartphones. It includes clearance for an AUX cable and uses two M3 nuts with two M3×10 countersunk screws. Print the components separately as needed for assembly; the holder is intended to install without permanent interior modification.

Fits Fiesta · Sixth generation

Steering-wheel horn retainer ring that secures the horn ring or button to the steering wheel. Verified fitment is 1965-1966 Ford Galaxie and LTD steering-wheel assemblies. Print with supports at 100% infill in PETG; long-term durability is not established.

Fits Galaxie · Fifth generation · LTD · First generation

Removable, multi-piece dashboard phone-holder assembly that mounts over the center storage-bin lid area of the European Ford Fusion dashboard while keeping the storage space available. The assembly includes a main mount, brace, reinforcing plate, USB retainer, and a three-piece spring-loaded phone cradle; print two copies of the left side panel and mirror one for the opposite side. A pair of pen springs and an external USB power module are required for the spring action and charging feature, respectively, and the assembly can be removed without permanent vehicle modification.

Fits Fusion · European

Replacement retaining pin connecting a hatchback privacy tray to the rear hatch or door. Fits the C346 application for 2012–2018 vehicles. Print laying down with supports for improved shear strength; ASA, PLA, and PETG are suitable material options, with 0.1 mm layer height reported to improve mating fit.

Fits Focus · Third generation

Cup holder that mounts over an interior door handle to hold medium and large drinks. Verified fitment is the Ford Fusion European generation (2002-2012), with an explicitly reported 2004 application. The printed body uses the door-handle interface and requires supports for the large bridge.

Fits Fusion · European

Replacement lower dashboard fader cover for the Ford Sierra/Merkur instrument-panel application represented by Ford generation 411. The package includes a blanked cover and a separate variant with a 27 mm opening for a 12 V USB socket; the source notes that right-hand-drive use requires mirroring and that the USB locking ring may need trimming.

Fits Sierra · Sierra

Printed adapter and multipart cover, spacer, riser, locking, template, and connector components for fitting a twist-attach driver-assistance rearview mirror to 2013-2019 Ford Flex vehicles. The assembly supports lane-departure warning, lane-keeping assistance, and automatic high-beam functions when paired with a compatible camera-equipped mirror and the required hardware, wiring, windshield template, and calibration. Riser styles A, B, and C are included; Style B and C use documented aluminum companion pieces.

Fits Flex · Flex

Functional replacement clip set for the rear parcel shelf of the Ford Ka Mk2 (2008–2016). Includes left and right small clip variants and larger left and right glue-on repair variants; the smaller design may require trimming, while the larger design provides more gluing area. Designed to print flat without supports; PETG or ABS are recommended.

Fits Ka · Second generation

Circular cup-holder adapter for the verified Ford Flex generation, sized for a factory opening of approximately 87.6 mm. The standard adapter supports slim 8.4 oz (248 ml) and 12 oz (355 ml) cans through a 60 mm inner opening and seats just above the illuminated ring where equipped. The included smaller insert is an alternate size for slimmer containers under 30 mm diameter. The two files are compatibility variants rather than a simultaneously assembled kit.

Fits Flex · Flex

Full-size replacement slider guide for the dashboard ashtray on Ford Bronco vehicles from 1992–1996 and Ford F-Series vehicles from 1992–1997. The printed component keeps the ashtray supported in its dashboard tracks so it can slide and remain in place. The ashtray and any mounting hardware are separate components. Slight sanding of the top and bottom may be needed for a snug fit; the creator recommends PETG and supports for printing.

Fits Bronco · Fifth generation · F-Series · Ninth generation

Two-piece replacement mounting set for the vacuum actuator on top of the factory air-conditioning box. It adapts the installation to a Dorman 604047 vacuum actuator; installation requires reworking the actuator arm with a screw and nut, trimming the replacement actuator to fit, and using two M3×6 and two M3×8 screws. Verified fitment is 1965–1968 Ford Galaxie.

Fits Galaxie · Fifth generation