Find your next part.

Six source-authored STL variants for repairing the convertible headliner mounting interface on the Volvo C70 second generation (2005-2013). The set contains the creator-named G/P receiver types in three forms: base, versions with four removable printing-stability fins, and versions with an included clip plus a lower adhesive hole. Print in ABS as oriented, without supports, at 100% infill; verify the receiver profile, front/rear position, retention, and adhesive before installation.

Fits C70 · Second generation

Flexible replacement insert for the rear-seat armrest drink holder. It restores the retaining tabs that hold smaller-diameter drink bottles, using a press-fit insert that can be secured with clear silicone; trim remnants of broken original tabs before installation. The documented applications are V60 2015, V70 2008-2010, XC60 2010-2017, and XC70 2008-2014 within the corresponding live catalog generations. Print with flexible TPU; the insert may remain removable when larger containers are needed.

Fits V60 · First generation · V70 · Third generation · XC60 · First generation +1

Full-size cupholder insert that attaches to the rear of the original center-console storage tray with double-sided tape and holds a European 330 ml can. Verified fitment is the P1800/1800S/1800E/1800ES center-console storage area represented by live generation 1716; compatibility with other Volvo lines or generations is not established. Verify tray dimensions, tape retention, can clearance, and heat-suitable material before driving.

Fits 1800 · P1800/1800S/1800E/1800ES

Full-size replacement blend-door linkage arm for the HVAC system in the Volvo 850, replacing the brittle plastic arm that restores heater and air-conditioning blend-door operation. Verified source fitment covers the 1993–1996 overlap within the live 850 generation taxonomy. Verify HVAC variant, linkage orientation, pivot and rod interfaces, clearances, and secure operation before driving.

Fits 850 · 850

Full-size dashboard mounting set for installing a Sony XAV-AX5500 2-DIN head unit in the Volvo 940 dashboard. The set includes the main radio frame, a magnet-attached glare hood, and a locking piece for rear retention. The hood requires four 8 × 2 mm rare-earth magnets and may interfere with head units whose dimensions extend into the double-DIN opening. Use a cabin-temperature-capable material, and verify the dash opening, mounting holes, fastener engagement, magnet polarity, head-unit clearances, and retention before installation.

Fits 940 · 940

Ball mount for a compatible phone-holder cradle that attaches to the center dashboard vent/trim area of the second-generation V40 and provides a spherical interface for adjustable phone positioning. The design is full-size for in-car use; use ASA or another heat-resistant material because PLA may warp in hot vehicle interiors, and verify the mating holder, retention, dashboard clearance, and unobstructed controls before driving.

Fits V40 · Second generation

Full-size two-cup console cupholder add-on for the empty center-console/storage box in Volvo S40 second-generation, V50 first-generation, and C30 first-generation applications. The assembled kit provides two 330 ml cup recesses and a narrow side storage slot; print the three components and glue them together. Installation may require removing the rubber at the bottom of the box. Verify the console-box variant, fit, retention, clearances, and heat-resistant print material before installation.

Fits C30 · First and only generation · S40 · Second generation · V50 · First generation

Full-size functional tray for the front tunnel-console cupholder area of the Volvo XC90 second generation (generation 1752). It fits around the 12 V socket and adds a wall to separate and contain the two front cup wells. Verify the console variant, dimensions, outlet clearance, retention, and print strength before installation or use.

Fits XC90 · Second generation

Two-piece mount assembly for attaching a 7-inch display to the rear headrest of a 2014 Volvo V60. It includes a rear support and a front display plate secured with two M6x60 bolts and matching nuts. Verify headrest-bar fit, display attachment, clearances, and printed-part strength before installation.

Fits V60 · First generation

Replacement handle for the retractable rear cargo/privacy cover, restoring the grip used to pull and position the cover in the rear cargo area of Volvo V70 second-generation and XC70 first-generation wagons. Source-backed P2 coverage is 2001–2007. Print in ABS for high-temperature areas. Verify the cover variant, handle orientation, attachment interface, fit, retention, and material suitability before installation.

Fits V70 · Second generation · XC70 · First generation

Undermounted phone slot for the Volvo XC40 center console that retains a phone while preserving simultaneous access to the wireless charger. The opening is 165 mm x 16 mm; verify phone and case clearance, console variant, retention, cable routing, and unobstructed controls before driving. Use a heat-resistant cabin material such as PETG or ABS.

Fits XC40 · First generation

Replacement glovebox bag hook for Volvo XC40 first-generation and C40 first-generation gloveboxes. The hook clips into the glovebox hanger location for hanging a small bag. Two printable variants are included: a plain hook and a Polestar-logo hook. Compare the retaining interface with the original, confirm engagement and clearance, and verify secure retention and load suitability before use. The design notes a 2 kg test load for the logo variant printed with three walls and 20% infill, but load performance is not guaranteed.

Fits C40 · First generation · XC40 · First generation

Three-pocket insert for the center-console cavity immediately before the cupholder. One pocket retains a key fob, the central pocket holds a phone, and a third pocket stores another small item. The insert locks under the cavity lip to reduce wobble and is sized for a phone about 15 mm thick. It fits the second-generation Volvo V60 and XC60 center-console cavity; verify phone and case thickness, trim variant, retention, clearances, and cabin-temperature material suitability before installation.

Fits V60 · Second generation · XC60 · Second generation

Drop-in phone stand for the front cupholder of the 2005 Volvo V50, with a cradle for an iPhone and a cutout for charging-cable access. The source print guidance specifies PETG and cautions against PLA for this vehicle-cabin application.

Fits V50 · First generation

Retaining bracket for fitting an aftermarket manual shift boot to the Land Rover Freelander 1 center console. It secures a Suzuki Jimny-style boot to the Freelander console opening and provides the supporting interface beneath the boot trim.

Fits Freelander · 1

Updated replacement clutch-switch holder for the Land Rover Freelander 1. It supports the clutch at its rest position and removes play caused by a worn original holder. The part installs from the top of the sensor opening and is secured by the existing retaining clip.

Fits Freelander · 1

Multi-part sunroof repair kit for the Land Rover Discovery 2. It includes the outer sliding guide, guide bushing, screw spacer, and right-hand drain corner used to restore guidance, spacing, and drainage in the sunroof mechanism.

Fits Discovery · 2

Blanking panel for the rear climate-control aperture in the Land Rover Defender L663 cubby box. It closes the unused opening when the cubby box is installed in a vehicle or configuration without rear heating controls.

Fits Defender · L663

Vehicle-neutral phone insert for the Volvo XC40 center-console cup holder. Source creator milcent identifies it as a remix of an Opel Astra cup holder; the Thingiverse source lists additional STL/STEP files and a Fusion 360 design file. Free download under Creative Commons - Attribution - Non-Commercial - Share Alike: attribution and ShareAlike are required, and use is non-commercial only.

Fits XC40 · First generation

Drop-in organizer for the Volvo S60 first-generation tunnel console, with a coin holder, credit-card holder, pencil slot, and multiple small pockets. The creator specifies no print material; PETG is an engineering-inferred material choice for cabin heat. Verify trim variant, dimensions, fit, retention, clearances, and unobstructed access before use. Source rights are CC BY-NC-SA 4.0: attribution, noncommercial-only use, and ShareAlike apply.

Fits S60 · First generation

Functional full-size console cup holder for Volvo V60/V90/XC60/XC90 SPA applications, scoped here to Volvo XC60 second generation (live generation 1755). The creator says it is for aluminium cans and states "Print in PETG." Two original STL files are included. Hybrid-model fitment is explicitly uncertain; verify the console, variant, clearances, retention, and print strength before use. Source rights are CC BY-SA: preserve attribution and ShareAlike terms.

Fits XC60 · Second generation

Full-size replacement floor plug for Volvo 240 floor openings. The creator describes it as a plastic replacement for the factory steel floor plugs and shows it installed in a vehicle floor. The source print was made in PLA at 20% infill; preserve the source Public Domain license.

Fits 240 · 240 Series

Two-piece mirrored phone holder that clips over the Volvo V40 dashboard trim and holds a phone in the center dashboard area. The creator sized it for an iPhone 11 in a case and reports that other phones may fit; the two printed pieces are joined with bamboo skewers or another suitable rod. Creator: Albert Polak. Source license: Creative Commons — Attribution; attribution required.

Fits V40 · Second generation

Functional full-size gap-filler inserts for the Volvo V90/S90 panoramic sunroof seal/gasket gap. The source provides left/right variants in multiple thicknesses; measure the vehicle gap and choose the matching STL. Personal-use only under the source Creative Commons Attribution-Noncommercial-ShareAlike terms: attribution, noncommercial use, and ShareAlike are required.

Fits S90 · First generation