Find your next part.

Full-size replacement floor plug for Volvo 240 floor openings. The creator describes it as a plastic replacement for the factory steel floor plugs and shows it installed in a vehicle floor. The source print was made in PLA at 20% infill; preserve the source Public Domain license.

Fits 240 · 240 Series

Two-piece mirrored phone holder that clips over the Volvo V40 dashboard trim and holds a phone in the center dashboard area. The creator sized it for an iPhone 11 in a case and reports that other phones may fit; the two printed pieces are joined with bamboo skewers or another suitable rod. Creator: Albert Polak. Source license: Creative Commons — Attribution; attribution required.

Fits V40 · Second generation

Functional full-size gap-filler inserts for the Volvo V90/S90 panoramic sunroof seal/gasket gap. The source provides left/right variants in multiple thicknesses; measure the vehicle gap and choose the matching STL. Personal-use only under the source Creative Commons Attribution-Noncommercial-ShareAlike terms: attribution, noncommercial use, and ShareAlike are required.

Fits S90 · First generation

Vehicle-specific replacement mounting plate for three 52 mm auxiliary gauges in the Volvo 940 middle console, also identified by the creator for Volvo 740 fitment. It replaces the ash tray and small storage compartment and uses integrated hooks plus the stereo mounting bracket for retention. Personal use only under the source Creative Commons Attribution-Noncommercial terms: attribution is required and commercial use is not permitted. This is not an OEM part; verify gauge depth, fit, retention, wiring, trim clearance, and print material suitability before installation.

Fits 940 · 940

Fascia-mounted holder for a standalone CarPlay display that replaces the standard radio face-plate fascia on Volvo S40 Second generation (2003-2012) and Volvo V50 First generation (2003-2012). The updated design uses three M4 threaded inserts and bolts and includes a separate pilot-hole guide. Indexed creator/source metadata recommends PETG or another heat-resistant filament with at least 15% infill; verify trim, display dimensions, visibility, clearances, retention, and print material before installation. Original creator: Encounter51. CC BY-SA applies: preserve attribution and ShareAlike terms.

Fits S40 · Second generation · V50 · First generation

Full-size functional phone dock for the Volvo C40 and XC40 Recharge center-console ashtray cubby, between the wireless charger and shifter. The creator describes no-drill installation and removal, a viewable phone angle, Lightning or USB-C cable routing, and non-slip pads to secure the dock in the cubby and retain the phone. The design was sized around an iPhone 11 Pro with a thin case; thicker cases may fit tightly. The source omits a print-material recommendation, so PETG or ABS is engineering-inferred for cabin use. Verify phone/case/plug fit, retention, cable routing, clearances, and unobstructed controls before driving. CC BY-NC attribution and noncommercial restrictions apply.

Fits C40 · First generation · XC40 · First generation

Full-size functional replacement magnetic lock for the Volvo 940 center-console armrest. The creator specifies a 10 mm diameter × 5 mm high flanged magnet with a 2.5 mm hole and a generic panel clip, and notes that the model holes may be drilled to match the available screw. Print in ABS, ASA, or another heat-resistant material rather than PLA because of hot vehicle interiors; verify fit, hardware retention, and latch operation on the specific armrest before use.

Fits 940 · 940

Full-size functional Samsung tablet stand for the first-generation Volvo XC60 dashboard center-vent/center-stack area. The creator describes a 10-inch Samsung tablet, charging capability, no panel editing or damage, easy installation/removal, and required support. Source photos show the printed stand installed around the XC60 center vents. Verify tablet and case dimensions, retention, charging-cable routing, visibility, vent airflow, hazard/control access, and clearances before use. PETG or ABS are engineering-inferred for cabin heat resistance because the source does not specify filament. CC BY-NC attribution and noncommercial restrictions apply.

Fits XC60 · First generation

Replacement clip for the convertible-top headlining assembly. The creator states it was designed for a 2012 Volvo C70, engages the associated receiver, and replaces Volvo clip 31256449; print guidance specifies 0.12 mm layers, no supports, and 100% infill.

Fits C70 · Second generation

Replacement plastic retainer for the inner upholstery/lining on the boot lid of the Volvo S40 II, 2003-2012 generation. The recovered original is a CC BY-4.0 Thingiverse design by thermaq; preserve attribution and the original source link. The public recovery page lists standard FDM guidance of 0.2 mm layers, 70% infill, and supports as needed.

Fits S40 · Second generation

Full-size functional center-console holder for retaining two phones above the cup holders in the first-generation Volvo S90 (2016-present). The source describes a friction-fit holder for the oddly shaped console area and shows physical prints in the vehicle. Verify phone/case clearance, retention, console trim protection, driver visibility, controls, airbags, and secure behavior before driving.

Fits S90 · First generation

Functional replacement manual gear-shift knob for the Volvo 850 (1991-1996). The source describes a push-on shaft interface with a keyway to prevent rotation and notes that scaling to 103% may be needed for the creator’s printer. Source guidance recommends PETG or ASA at 20-30% infill; verify fit and secure retention before driving.

Fits 850 · 850

Two-part, glue-assembled full-size cup holder for slim cups, designed for the Volvo 850 (1991-1996) and mounted on the seat-shift area between the front seats. The source recommends PETG or ASA for durability and heat resistance, 20-30% infill, and checking supports in the slicer. Verify fit, retention, clearance from the shifter and seats, and safe use with closed containers before driving.

Fits 850 · 850

Replacement radio fascia phone mount with an integrated adjustable phone cradle and USB access. The creator's source lists Volvo C30, C70, S40, and V50 fitment and supplies generic-size variants, an iPhone 13 Pro Max demo, an editable STEP phone-holder part, and a Radio Fascia STL. Use a heat-resistant material for vehicle-cabin temperatures, verify dimensions and retention, and keep the device clear of controls and driver sight lines.

Fits S40 · Second generation · V50 · First generation

Functional two-file cup-holder insert for P3 Volvo XC60/S60, source-stated 2011-2017 fitment. The source images show the printed ring installed in the center-console cup-holder location and retaining a beverage can. Verify model year, chassis/console variant, fit, retention, clearances, and material suitability before use. The creator did not specify filament; PETG is engineering-inferred for cabin heat resistance. CC BY attribution terms apply.

Fits S60 · Second generation · XC60 · First generation

Roof microphone mount designed to integrate an RSNAV microphone capsule into the unused right-hand-drive microphone location of an Audi A4/S4/RS4 B8. The downloaded design is an Autodesk Fusion 360 CAD file containing BREP design data.

Fits A4 · B8

Two-piece repair kit for a retractable cargo cover: a replacement end-cap repair piece and a screw anchor/plug for the main metal rod. The parts restore shade retraction and tension; the source instructions call for fit checking, possible drilling or filing, epoxy bonding, and ABS with 100% infill. Exact fitment is Audi A4 Avant B5, 1994-2001.

Fits A4 · B5

Drop-in center-console organizer with two card slots and two cylindrical openings for small items. Creator attribution: SkriptZz. Source fitment is Audi A3 8V, 2018; source print guidance specifies Sunlu PETG and 15% infill, with PETG or ASA recommended on the catalog page. CC BY-SA: commercial use allowed, attribution required, and share-alike terms apply.

Fits A3 · 8V

Custom dashboard-mounted magnetic phone-holder hook for the Audi A6 C6 (4F5), designed to accept a separate magnetic wireless charger and attach beside the dashboard air vent. The creator recommends PETG or ASA, 20-30% infill, 1.2-1.6 mm walls, and verifying supports in the slicer. Verify fit, retention, print strength, visibility, and unobstructed access to vehicle controls before use. CC BY: commercial use allowed with attribution required.

Fits A6 · C6

Replacement clip for the removable back cover of the front seat on the Audi A4 B5 (1994-2001). The creator reports that it repairs a fallen/deformed seat-back cover and can be fastened with glue or, preferably, a screw. The source recommends PETG or ASA and 20-30% infill for durability; verify the original clip profile, seat variant, attachment method, clearance and secure retention before use. Original design by John Rijos (VWrijos), licensed CC BY; attribution is required and the source marks commercial use as allowed.

Fits A4 · B5

Functional rear speaker adapter ring for the Audi A4 B5 (1994-2001). It adapts the stock rear speaker location and mounting holes to a standard 6.5-inch speaker; the source identifies Kicker 6.5-inch hole spacing, reports PLA test prints and vibration, and advises flipping the part upside down in the slicer to avoid supports. Verify speaker fit, depth, clearance, fastening, vibration isolation, and material suitability before use.

Fits A4 · B5

Vehicle-specific bracket for positioning a phone in the Audi Q8 wireless-charger area and preventing movement. The creator describes an iPhone 14 Pro fit and says the design can be modified in Tinkercad for other phones. Original design by john Dean (Jdeano12), Thingiverse thing:5812325, licensed CC BY; attribution is required and commercial reuse is allowed. The source recommends PETG or ASA, 20-30% infill, and verifying supports in a slicer. This is a custom accessory, not an OEM replacement; verify fit and vehicle safety before use.

Fits Q8 · Q8

Single-piece phone cradle for an Apple iPhone XS Max that seats in the Audi Q5 8R center-console wedge opening and provides a cable-routing channel while restoring the cupholder. The source calls for supports and recommends PETG or ASA with 20-30% infill; verify phone/case clearance, print strength, retention, and unobstructed access to vehicle controls before use.

Fits Q5 · 8R

Fitted center-console storage-tray insert/mat with an Audi-ring recess pattern, identified by the source for Audi S5 B9/F5 center-console fitment. The source attributes the original design to Phil Perry (Brummephil), describes it as a remix of JGutz20.mn’s Audi B9 center mat, and recommends PETG or ASA for durability and heat resistance. Verify trim level, dimensions, installation, and cabin heat exposure before printing or use.

Fits A5 · F5