Find your next part.

Trying to find a phone mount that would work on my 2020 forester sk. I didn't want something that will block an air vent or go into my cd player or occlude my view to any displays or windows. I wanted it to work with my magsafe car adapter that I bought on amazon to work with my iphone. This mount will attach to the right side console right below the color trim. It utilizes a standard 17mm ball mount so it can work with any accessory that attaches with a 17 mm ball mount. I am using this magsafe car mount https://www.amazon.com/gp/product/B08CZPVLNL/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1 The look is very clean and sturdy. I used 3M outdoor strength double sided stick pads to stick to the console.

Fits Forester · Fifth generation (SK)

If you like the design and wouldn't mind, please give me a watch and subscribe on youtube...I have videos designing these types of things from time to time and could use the support! My Youtube > https://bit.ly/35j5BL1 IG - @Myowncasualty IG - @EndMotive I printed this on an Elegoo Mars....supports will be hard to remove on an FDM printer without dissolvable support material. Fits LHD Subaru Forester SF/SG ....make sure your dash matches the one pictured. Includes 52mm and 60mm variant. No hardware or anything required. Just remove the factory dash vent carefully and this will clip in place just like the factory part. Also has a small routing hole to run wires. The vent still functions....just not as good lol.

Fits Forester · First generation (SF) · Forester · Second generation (SG)

This thing is a replacement part for 3rd gen Subaru Impreza cup holders. It may fit other Subaru models from that same period. It helps center a standard diameter beverage can in the cup holder so it doesn't slide around. It also collects condensation and leaked drink. It probably could use an extruded honeycomb pattern to give liquid a place to run off to...

Fits Impreza · Third generation (GE/GH/GR/GV)

Subaru Forester SH - Door pocket bin. Fits snugly into the door pocket. Store your sweet wrappers, tickets, etc in this handy bin. Push firmly to clip into place under the angled lip of the door pocket. .stl provided is for the right side (UK drivers), if you want the left, simply mirror the model in your slicer (pay attention to which direction you mirror!). Print in PETG/ABS etc if you live in very hot climates where PLA may soften in the heat. However for the sunny UK (!) I have found PLA is perfectly fine as its mostly protected from direct sun and heat in the door (used a similar bin in my old Forester for three years no issues). 0.25mm layers, 2 perimeters, 20% infill is fine = roughly a bit less than 5 hour print per bin. Nothing crazy - an easy print. Some overhang on the opening lip but should be within the capability of most printers!

Fits Forester · Third generation (SH)

A slip - in Fuel Cap holder for Subaru Forester (SH - Gen3) This version has been strengthened with gussets as the original version (In my experience in the Aussie Heat) Warped and split with the pressure of the cap after repeated use. I remixed the version by elanaut and added the Gussets I will most likely fit other model Subarus - just look for the pressings in the fuel door like in these pictures.

Fits Forester · Third generation (SH)

I made this visor clip for as a replacement for a broken one. It fits a 1993 subaru impreza so it should work on a 93-99 impreza. Works great but the shape is slightly different from the oem part as mine was broken.

Fits Impreza · First generation (GC/GF/GM)

Subaru WRX side defroster vent mount for the Cobb Accessport. Did not need any additional hardware. Just pops right in and holds the accessport snugly. Tested on 2018 WRX model. This is an ongoing project. Check back for updates soon! ### Changelog #### Body3-angled.stl 2020-02-18 - Moved accessport body to the right of the vent. - Angled accessport body to face the driver.

Fits WRX · First generation (VA)

Replacement door sill trim clips for the Volkswagen Scirocco Mk II; the source identifies the application directly.

Fits Scirocco · Scirocco

Three-piece phone mount that snaps onto the dashboard shelf below the radio, with a charger-cable slot and rubber-band clamping mechanism. The creator states 2017 fitment.

Fits Equinox · Second generation

Replacement clip that secures the hood prop rod. The creator modeled it from the broken factory clip and states 2004 fitment.

Fits Colorado · First generation

Hanging storage tray that hooks onto the full center console's file-folder bracket. The supplied STL is the taller soda-can-depth version.

Fits Silverado · Third generation

Replacement glove-box hinge pin for a 2014 Transit Connect.

Fits Transit Connect · Second generation

Insert that enlarges the factory cup holder to approximately four inches in diameter.

Fits Escape · Second generation

Custom-fit console organizer with dedicated slots for everyday items.

Fits Escape · First generation

Factory-clip dashboard mount for an ECU display, rocker switches, and status LEDs.

Fits Explorer · Second generation

Modular panel for six standard 32×21 mm switches, with attachment areas for additional accessories.

Fits Ranger · Global first generation

Replacement front-bumper towing-eye cover designed after the factory cover was lost.

Fits Fiesta · Fifth generation

Square cup-holder insert for the stated Focus Mk4 application.

Fits Focus · Fourth generation

Replacement knob for a manual window crank, installed by heat-mushrooming it over the post while retaining free rotation.

Fits Ranger · North American second generation

Interior door-handle housing and handle repair set for a broken driver-side handle assembly.

Fits Ranger · North American second generation

Rear side-skirt air-deflector replacement designed to reuse the original metal clip, screws, and fittings.

Fits Mustang · Sixth generation

Replacement gear for the cabin air-vent adjustment mechanism, created by Srdjan Vučković (vuckos).

Fits A4 · B7

Replacement latch for the centre armrest lid, attributed to Michael Chen.

Fits A4 · B7

Replacement sun-visor holder and retainer clip created by B ++ (bray).

Fits Audi 80 · B1