Find your next part.

this is a replacement part for the blind that covers the boot on an alfa 147

Fits 147 · Tipo 937

I made this holder for my iPhone 4s and 5s, fit for Alfa Romeo 147 cup holder. Use the holder without bumper, I only use 0.3mm thin case. How to use: Put the holder into the cup holder, and turn right to lock.

Fits 147 · Tipo 937

Replacement for the stock dashboard drawer slot that provides a phone-holder position. The source supplies a clean blank variant and a custom variant for a 76 × 14 mm handset plus a disassembled Bluetooth/FM adapter, and explicitly states Alfa Romeo 147 and GT fitment. The creator recommends PETG-CF to reduce heat warping; PETG is the closest supported catalogue material. Confirm accessory dimensions and isolate any added electrical wiring safely.

Fits 147 · Tipo 937 · GT · Tipo 937

Two-piece phone holder for the dashboard CD slot, comprising the slot insert and a handset cradle sized by the creator for a OnePlus 8 with a case. The source explicitly states Alfa Romeo GT and 147 fitment and requires two M4 screws. Print in PETG for cabin heat, confirm the 80 mm mounting-hole spacing, and redesign only the handset cradle for other phones.

Fits 147 · Tipo 937 · GT · Tipo 937

Cabin accessory that fits the cupholder position and holds a box-shaped handheld device. The source explicitly states Alfa Romeo 147 and GT fitment. PETG is recommended here for a sun-heated interior; verify the 70 mm holder envelope and device clearance before use.

Fits 147 · Tipo 937 · GT · Tipo 937

Replacement trim cover for the screw behind an interior door handle. The creator designed and fitted it for the Alfa Romeo GT, noting that its retaining clip is delicate. Print in PETG for cabin heat and improved clip toughness, remove supports carefully, and compare the retaining geometry with the original before installation.

Fits GT · Tipo 937

Replacement drive gear for the powered-seat mechanism. The creator designed and printed it after the original plastic gear broke in their Alfa Romeo 166; compare the original gear, tooth form and shaft fit before installation.

Fits 166 · Tipo 936

Replacement loop insert for a broken Alfa Romeo 147/156 key fob, with both models explicitly identified by the creator. PETG is inferred for repeated key-ring flexing and impact; nylon is a tougher alternative.

Fits 147 · Tipo 937 · 156 · Tipo 932

Replacement sun-visor clip for Alfa Romeo 156. The creator specifically recommends ABS for longer service life; remove print supports before direct installation.

Fits 156 · Tipo 932

Two-piece drink holder designed and installed for a 1999 Alfa Romeo 156 2.0 Twin Spark. Bond the base and holder together, then attach the base with automotive-grade double-sided adhesive as the creator describes. PETG is inferred for cabin heat and toughness; ABS is an alternative.

Fits 156 · Tipo 932

Replacement CR2032 battery tray for an Alfa Romeo 156 key fob. The creator says it might fit other models, but those generations are withheld without corroboration. PETG is inferred for snap-fit toughness; PLA is an alternative for light use.

Fits 156 · Tipo 932

Latest source revision of a clip-on paddle-shifter extension for Alfa Romeo 156 Selespeed controls. PETG is inferred for repeated handling and cabin heat; ABS is an alternative. Confirm secure retention and unobstructed steering-wheel movement before driving.

Fits 156 · Tipo 932

Multipart spacer set for installing a 6.5-inch front-door speaker without modifying the door. Print one base plate and two copies of the spacer, as the creator specifies. Explicitly designed for Alfa Romeo 147 and 156 doors. PETG is inferred for cabin heat resistance and screw-clamping toughness; ABS is an alternative.

Fits 147 · Tipo 937 · 156 · Tipo 932

Replacement retaining bracket for the powered-seat control switch panel. The source identifies Alfa Romeo 164 fitment; compare the original switch panel and attachment points before installation.

Fits 164 · Tipo 164

Bracket for mounting a 3.5-inch speaker in the dashboard of an early Alfa Romeo 33 Series 1 (1983–1986). Confirm speaker diameter, depth, wiring clearance and secure attachment before installation.

Fits 33 · Tipo 905

Replacement support bracket for the door tweeter on the Alfa Romeo Tipo 916 GTV. The creator designed it to replace the original bracket that commonly breaks with age; verify the speaker and door-trim attachment points before installation.

Fits GTV · GTV (Tipo 916)

Replacement seat-adjustment grip for Type 116 GTV interiors. Test the bore and lever engagement by hand before applying adjustment force; the creator's possible GTV6/75/Milano compatibility is not treated as confirmed fitment.

Fits GTV · Alfetta GT / GTV / GTV6 (Tipo 116)

Replacement interior door-handle cover for Type 116 GTV models. The creator notes that the small retaining legs can remain fragile; inspect clip engagement and avoid forcing the cover during installation.

Fits GTV · Alfetta GT / GTV / GTV6 (Tipo 116)

Replacement trim surround for the manual moonroof lever. The creator directly copied an original GTV6 part and notes that these surrounds become brittle with age. The unverified number mentioned by the creator is deliberately not assigned as an OEM association.

Fits GTV · Alfetta GT / GTV / GTV6 (Tipo 116)

Flexible gasket for the exterior door handle of an Alfa Romeo Alfetta sedan. The creator printed it in TPU at 20 mm/s and notes that the current size squeezed on successfully but could possibly be slightly larger; test-seal against the handle and paintwork before final assembly.

Fits Alfetta · Berlina (Tipo 116)

Accessory holder for a 250 ml European can in a 1998 Tipo 916 Spider. It mounts through the 12 V socket adapter; the creator notes that one wrap of tape may be needed if the socket fit is loose. The source geometry does not include the photographed laser-marked logo.

Fits Spider · Tipo 916

Replacement bracket for the electrical connectors on the instrument cluster of a 1989 Alfa Romeo Spider. Compare the source images and original bracket before installation; support is required for the source orientation.

Fits Spider · Series 3 (Tipo 115)

Two source-provided replacement connector variants for the cabin heater vents in 1970–1976 Alfa Romeo 2000 GTV/unificato Bertone coupes. Compare the original connector and select the matching variant before installation.

Fits Giulia GT / GTA · Tipo 105 / 115 Coupes

Replacement cover for a lost or broken ISOFIX access-opening flap on 2018-and-later Giulia and Stelvio rear seats. This is non-structural trim and must not obstruct the child-seat anchor.

Fits Giulia · Tipo 952 · Stelvio · Tipo 949