Find your next part.

Replacement bracket for the cabin air filter on the Boxster 987, designed in OpenSCAD after the creator broke the original bracket. The creator printed it in ABS.

Fits Boxster · 987

Plug for the dashboard clock opening, originally made to accompany an in-car iPhone mount. The creator photographed a printed prototype and states compatibility from 1969 through 1989.

Fits 911 · Original (901/911) · 911 · G Model

Removable MagSafe phone mount that spans the top of the factory PCM screen. It holds the charging puck with 3M VHB tape, routes the USB cable toward the glovebox, and attaches using two 0.048-inch metal tabs.

Fits 911 · 991 · Boxster · 981 · Cayman · 981

Removable cup holder that screws to a padded center-console side panel with four M3 threaded inserts and four M3 screws. The holder slides upward off its bracket for full seat travel; the supplied orientation is for the right side and can be mirrored for the left.

Fits 911 · 996

Handed replacement gears for the left and right convertible-top transmissions. The creator states that the sides differ and cannot be mirrored, recommends carbon-fibre-reinforced plastic for strength, and notes that the metal core may need heating for the snug press fit.

Fits Boxster · 987

Repair tabs for broken center-console switch covers, designed to retain with the original spring clamp.

Fits 911 · 964 · 911 · 993

Cable-slot variant of a center-console MagSafe charger holder. The charging puck presses into the top, its cable coils underneath and exits through the added rear cutout, and the holder fits beneath the metal trim and against the rubber lip while preserving cupholder and parking-brake access.

Fits Macan · 95B

Ashtray-replacement cupholder for the late-style interior. The fixed right lip slides over the existing mount and a printed plug retains the left side, while the cupholder section remains removable when not in use.

Fits 944 · 944

Four-piece ashtray-slot phone mount for a Samsung Galaxy S22 Ultra with Samsung's Standing Protective Cover. The TPU/FLEX base and wedge fit the front ashtray without clips, adhesive, or vehicle modification; the creator specifies ABS or PETG for the heat-exposed arm and body.

Fits Panamera · G1 (970)

Replacement retaining button for the jack housing in the front luggage compartment, modeled after the original button was missing.

Fits Boxster · 981

Flat-backed replacement clip for retaining a front dashboard tweeter when the original plastic clip has become brittle.

Fits 911 · 996 · Boxster · 986

Replacement lever for the electric sunroof latch. The creator reports that a printed and installed version works; the second, fixed STL is the latest version and uses a solid peg after the split design repeatedly broke.

Fits 924 · 924 · 944 · 944

Center-console tray for an Anker 15W PowerWave Alloy charging pad, sized for a cased Samsung S20+. Includes an editable tray model and a separate TPU underlay to protect the console; the creator installs both after removing the factory rubber liner.

Fits 911 · 991 · Boxster · 981 · Cayman · 981

An iPhone X holder shaped to fit the center-console power-outlet opening.

Fits Macan · 95B

Dual can holder with a rectangular base and raised retaining walls, designed and test-fitted by the creator in a 2001 Boxster S 986.

Fits Boxster · 986

Separate front-dashboard and rear rings for mounting 4-inch replacement speakers. The front and rear geometries differ, and installation requires cutting the new speakers' mounting tabs and bonding their outer rings to the adapters.

Fits 911 · 996

Rear-seat cigarette-lighter replacement panel for installing aftermarket power ports while reusing the original plate screws.

Fits Cayenne · E1 (955 / 957)

Finishing fascia for an Android two-DIN radio in the 159. The creator gives an 11.5 × 19.2 cm radio size, a 13 × 20.2 cm dashboard opening, and printed it in black PETG.

Fits 159 · Tipo 939

Adapter for mounting a standard tweeter on the original 145 tweeter mount. The creator glued the tweeter to the adapter and removed the front grille and bent the tweeter wire pins to fit the available space.

Fits 145 / 146 · 145 / 146 (Tipo 930)

Can holder sized for a 0.5-litre, 67 mm can and designed for the 159.

Fits 159 · Tipo 939

Two-part replacement sun-visor retaining clip. The creator recommends printing the base on its side for strength and using ABS because PLA may fail at cabin temperatures.

Fits 156 · Tipo 932

Replacement clip for the soft-top hood bag/tonneau cover.

Fits Spider · Series 3 (Tipo 115)

Printable left- and right-side map-pocket shells, back plate, and edge trims intended to be covered with vinyl; the back plate is made from 1–1.5 mm aluminium sheet.

Fits Giulia GT / GTA · Tipo 105 / 115 Coupes

Panels, connector cap, and switch plate for relocating an OBD-II socket inside the driver-side storage compartment while allowing the compartment to close.

Fits MiTo · Tipo 955