Find your next part.

Cosmetic plug for closing the exposed holes left after removing the armrests from individual V-Class seats. The creator explicitly tags this chassis and supplies the printable child geometry and multiple CAD source views, but gives no material, seat-version, colour or long-term retention details. PETG, ABS and nylon are listed only as conservative tough cabin-heat-resistant choices. Compare the exposed seat hole and plug profile, fit without forcing the seat trim, and confirm the plug remains secure and does not interfere with seat adjustment or restraint hardware.

Fits Vito / Viano / V-Class · W447

Two-piece holder that slides over the central Audio 20 display and carries a 12.9-inch second-generation iPad Pro in its leather case. The creator explicitly designed it for the V-Class/Vito/Marco Polo display in this chassis and instructs bonding the two printed pieces after printing. The source gives no material; PETG, ABS and nylon are listed only as conservative cabin-heat-resistant choices. Match the Audio 20 display and tablet/case dimensions, line the vehicle-display interface with textile tape as shown on the same-author follow-up, and verify the holder cannot obscure the road, controls or airbags or release the tablet under braking.

Fits Vito / Viano / V-Class · W447

Multi-part Gridfinity-based replacement for the center-console cupholder and storage unit, explicitly stated by the creator to fit V-Class/Vito, C-Class, E-Class sedan/estate/coupé/cabriolet applications sharing the original insert. It reuses the original double-torsion spring, adds supported cupholder clips, and uses 6×2 mm magnets. Preserve spring orientation, secure every magnet, verify each module locks in place, and keep all contents and moving parts clear of controls. The creator identifies the exact replaced cupholder unit as A2056800691, corroborated by the official Mercedes-Benz genuine-parts listing.

Fits C-Class · W205 / S205 / C205 / A205 · E-Class · W213 / S213 / C238 / A238 · Vito / Viano / V-Class · W447

Drop-in center-console insert developed in a 2015 C450T, with separate versions that either include or omit a phone pocket. The creator states that it provides two bottle or can recesses and requires no tools or vehicle modification. Use the version appropriate to the carried items, verify full seating and console-lid clearance, and confirm bottles and the optional phone remain retained during driving.

Fits C-Class · W205 / S205 / C205 / A205

Three-part magnetic phone-mount system whose base clamps between the display and instrument cluster. The source specifies 6×4 mm and/or 10×3 mm magnet pockets and shows the physical components and installed fit. Confirm magnet polarity and secure encapsulation, use the correct nut and ball adapter, protect trim, and verify the phone cannot obscure the cluster, detach, or interfere with controls.

Fits C-Class · W205 / S205 / C205 / A205

iPhone 8 holder explicitly designed for C-Class and GLC interiors equipped with option code 522 Audio 20 NTG5 and the small display. It is installed with double-sided tape and the source routes the charging cable beneath the center console. Fitment is limited to that display option; clean the bonding surface, use automotive-grade tape, strain-relieve the cable, and verify the holder cannot obscure instruments or detach.

Fits C-Class · W205 / S205 / C205 / A205 · GLK / GLC · X253 / C253

Charging dock sized for an iPhone 13 Pro in a Rhinoshield case and designed for the center-console cupholder. The creator notes that other cases, phones, and cable plugs require geometry changes, recommends ABS or PETG because cabin temperatures can exceed 70 °C, and provides both STL and STEP source files. Verify exact phone and plug retention, strain-relieve the cable, and keep the dock clear of controls.

Fits C-Class · W205 / S205 / C205 / A205

Two-part MagSafe-charger stand made to replace the ashtray insert and tested by the creator in the C-Class console. Source images show the physical print and installed charging position. Use cabin-heat-resistant material, verify the charger is securely retained and ventilated, route the cable without pinching it, preserve lid and control movement, and do not use the assembly as an ashtray.

Fits C-Class · W205 / S205 / C205 / A205

Four-file tray system for an Anker PowerWave Pad in the center compartment. The source shows the tray fitted with the compartment opening and closing and includes revised V2 geometry that moves the charger 15 mm for smaller phones. Select the matching base and cover pair, use cabin-heat-resistant material, route the cable without pinching it, and confirm the phone, tray, lid, selector, and adjacent controls remain secure and unobstructed.

Fits C-Class · W205 / S205 / C205 / A205

Center-console insert for a Spigen SteadiBoost Compact wireless charger. The creator explicitly developed and photographed it in the C-Class cabin, warns that parked-car temperatures can reach 70–90 °C, and recommends ABS instead of PLA where possible. Route and strain-relieve the power cable, preserve console-lid and control clearance, confirm the phone remains retained during driving, and stop use if heat deformation occurs.

Fits C-Class · W205 / S205 / C205 / A205

Cupholder-mounted cradle made for a Sony Xperia XZ2 in a protective PU case and test-fitted by the creator in a C350e. The vehicle must have the removable factory cupholder option. Confirm the cradle is snug without overstressing the cupholder, keep the phone and cable clear of the selector and controls, and remove it if the print softens, cracks, or permits the phone to move.

Fits C-Class · W205 / S205 / C205 / A205

Simple insert that holds an Ooono traffic-alert device in the center-console ashtray. The creator identifies exact hatchback fitment; no steering-side, console-option, or facelift extension is stated. Confirm the ashtray dimensions before printing, use a cabin-temperature-capable material, ensure the device cannot become loose, and keep it clear of the selector and all driving controls.

Fits A-Class · W176

Removable bottle-holder insert designed from the center-console compartment in a 2017 hatchback. The creator states that the original center divider must be removed and that the two holes allow the insert to be lifted out for cleaning. Fitment evidence is limited to the 2017 example; no steering-side, trim, or facelift extension is inferred. Use a cabin-heat-resistant material, verify that bottles remain stable, and remove the insert if it interferes with nearby controls.

Fits A-Class · W176

Two-file custom rack system made to fit the center-console ashtray opening in an SLC 180. The author description explicitly identifies the R172 ashtray and provides a fitted remote-control rack plus a starter frame that can be extended for other small controls. Source fitment is limited to the SLC 180 facelift variant; no pre-facelift SLK fitment is claimed. Use a cabin-temperature-capable material, verify the insert is fully seated, keep controls and loose objects clear of the selector and roof controls, and remove the rack if it can move or obstruct driving controls.

Fits SLK / SLC · R172

Clip-on folding sun-visor extension designed and physically shown on W212 and S212 driver and passenger visors while retaining access to the illuminated mirrors. The creator supplies separate left/right brackets and a 330 mm panel and requires ABS or ASA because PLA and PETG deform in summer cabin heat. Match the visor and seating position, use the specified high-temperature material, and verify the panel locks securely, folds clear, preserves required road visibility and cannot interfere with airbags.

Fits E-Class · W212 / S212 / C207 / A207

Support-free MagSafe charging mount designed for a W212 E350 across the creator-stated 2009–2016 span and physically shown on top of the centre-console ashtray. It is designed around the linked charging puck, 65 W socket adapter and 70 mm cable; other pucks are untested. Match all electrical and console dimensions, use cabin-heat-resistant material, strain-relieve the cable, avoid trapping heat, and verify the phone and mount remain secure without obstructing controls.

Fits E-Class · W212 / S212 / C207 / A207

Solid and through-hole accessory-mount bases remixed from a W212 cupholder phone-rest geometry and physically shown carrying a suction-mounted display. The author recommends PETG or stronger infill rather than the PLA lightning-infill prototype. Match the cupholder and accessory footprint, use cabin-heat-resistant material and suitable adhesive, and prove the mounted device cannot obscure controls, airbags or the road, overload the cupholder, or detach under braking.

Fits E-Class · W212 / S212 / C207 / A207

FDM-optimised replacement for the plastic female half of a trunk-well lid hinge, measured for a 2012 W212. The supplied file is right-hand; the creator instructs mirroring it for the left, printing in PETG with six walls and 25% gyroid infill, and orienting it at 45 degrees for strength. Match the original hinge and lid load, keep the hinge free of wiring and trim, and confirm the service lid opens, closes and remains supported before loading the trunk.

Fits E-Class · W212 / S212 / C207 / A207

One-piece centre-console insert published specifically for W212 fitment with a 90×78 mm storage compartment and a 66 mm circular recess for European 0.5 L cans. The source shows the printed insert installed but does not state body style, steering side or container-retention testing. Measure the console and container, use cabin-heat-resistant material, and confirm the insert seats fully, keeps a closed cool can stable and cannot obstruct the selector or controls.

Fits E-Class · W212 / S212 / C207 / A207

Phone holder designed for the PCMCIA slot in a 2010 C207 E500 coupe and around the creator’s phone with a Spigen card case, then printed in PETG. No other head-unit revision, phone or body style is established. Match the slot, card mechanism, phone and case dimensions; insert without forcing the electronics, and verify the mount cannot obscure controls, airbags or the road or eject the phone under braking.

Fits E-Class · W212 / S212 / C207 / A207

Four-part repair for the breakable sunshade vent/handle assembly in a W212, described by the creator as installed and tested in their car. The top and bottom handle pieces are joined with M2 screws; the creator later found the lower vent piece alone easier to install and recommends a higher-temperature material despite successful PLA use. Compare the broken assembly, use cabin-heat-resistant material, avoid over-tightening screws, and verify free shade and vent movement.

Fits E-Class · W212 / S212 / C207 / A207

Author-designed centre-console insert for W212 cars, physically shown in use with cups and a phone. The source supplies variants for 14 mm, 20 mm and 84 mm-wide phone cases plus can-stabilising rings, coin and card storage, specifies 24×3.5 mm felt pads for retention, and warns not to use PLA in summer cabin heat. Select only the matching variant, use heat-resistant material, fit the felt pads, and verify containers, cards and phone remain secure without obstructing controls.

Fits E-Class · W212 / S212 / C207 / A207

Cupholder-mounted phone rest designed for pre-facelift 2010–2011 W212 E350 sedans. The author shows the physical print with the original cupholder and states that its open centre permits a charging cable while the factory cover can still close. Print in ABS or another proven cabin-heat-resistant material, match the cupholder and phone dimensions, route the cable clear of controls, and verify the rest cannot release the phone or interfere with the selector under braking.

Fits E-Class · W212 / S212 / C207 / A207

Bottle and small-can inserts for the factory option-code 309 cupholder used in stated W212 and S212 cars with 7G-TRONIC-PLUS or 9G-TRONIC transmissions. The selected author files fit a 0.5 L beverage bottle and a 250 ml slim can; the unrelated vape-holder variant is deliberately not distributed. Match factory cupholder A 212 680 01 10 and the container dimensions, use cabin-heat-resistant material, and verify each insert and closed beverage remain retained without obstructing controls.

Fits E-Class · W212 / S212 / C207 / A207