Find your next part.

Replacement manual shifter-boot retaining frame for BMW E28 and E24 interiors. The creator measured an E28, fitted the design in the car and recommends PETG because PLA prototypes softened in cabin heat. The test car has a short shifter; correct worn or misadjusted linkage rather than relying on this frame to solve reverse-gear interference.

Fits 5 Series · E28 · 6 Series · E24

Replacement rotating knob/head for the manual sunroof crank of a BMW E28. The creator printed the part in PLA; PETG or ABS is preferable for a hot cabin. BMW catalogs supply the knob only with the complete crank handle, so no parent-assembly number is assigned. Confirm crank-pin diameter, trim color and production-date variation before fitting.

Fits 5 Series · E28

Front and rear spacer geometry with locating rod for installing a Musway ME462 coaxial speaker in a BMW E28 sedan. The creator reports that the adapter set fits perfectly. This is specific to the stated speaker footprint; compare the mounting pattern, depth and trim clearance before printing for another driver.

Fits 5 Series · E28

Spacer and washer for fitting an upgraded 4×6-inch front speaker in a BMW E28 while retaining the original speaker cover. The creator confirms that the hood-release lever still clears the speaker and specifies longer #8×1.25-inch oval-head screws with #6-32 speed nuts. Check speaker depth and fastener clearance before final assembly.

Fits 5 Series · E28

Upper and lower storage trays with cutting templates for the F32/F33 center-console cavity after removal of the original phone cradle. The creator physically demonstrates both the shallow installation and the optional deeper cut-out; the cutting templates are retained as functional parts of the set. Use cabin-heat-resistant material, protect wiring before any cutting, deburr the opening, and verify secure fit and unobstructed console operation.

Fits 4 Series · F32 / F33 / F36 / F82 / F83

Three-piece detachable Qi charging stand physically demonstrated in the center cup holder of a BMW F32. It uses a user-supplied silicone Qi charging pad and routes its USB cable through the cup base; other chassis fitments are not inferred. Use cabin-heat-resistant material, electrically sound charging hardware and protected cable routing, and verify secure retention, cooling and unobstructed controls before driving.

Fits 4 Series · F32 / F33 / F36 / F82 / F83

Clip-on key-fob holder designed and physically demonstrated in the cup-holder trim of a BMW F33 4 Series Convertible. The creator confirms the fit in his F33; no fitment to visually similar 1–4 Series interiors is inferred. Use cabin-heat-resistant material, dry-fit the clip, and verify that it cannot obstruct the controls, selector, handbrake or cup-holder use.

Fits 4 Series · F32 / F33 / F36 / F82 / F83

Console insert for BMW G20 and G21 3 Series cars without the factory wireless-charging trim, physically shown installed after removal of the original rubber mat. It accepts an Apple MagSafe puck, a 90-degree USB-C adapter and a slim 12 V USB-C adapter. Use cabin-heat-resistant material, secure and protect the cable, preserve access to controls and cup holders, and confirm the phone remains retained without obstructing driving controls.

Fits 3 Series · G20 / G21 / G28 / G80 / G81

Two-piece fold-down bag hook designed and physically demonstrated in the trunk of a BMW G20 3 Series. Install with an M6 nut, a 25–40 mm M6 socket-head bolt and a temporary nut-retaining aid as described by the creator. Use cabin-heat-resistant material, confirm the mounting point is structurally suitable, keep the load light and verify the hook and cargo cannot interfere with the trunk lid, wiring or emergency equipment.

Fits 3 Series · G20 / G21 / G28 / G80 / G81

Clip-on shopping-bag hook demonstrated on the factory rear parcel-shelf cover of BMW F31 and G31 Touring models. Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed vehicle operation.

Fits 3 Series · F30 / F31 / F34 / F80 · 5 Series · G30 / G31 / G38 / F90

Parametric insert demonstrated in the sliding-cover cup holder used by BMW F30/F31 and F32/F36 LCI interiors. Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed vehicle operation.

Fits 3 Series · F30 / F31 / F34 / F80 · 4 Series · F32 / F33 / F36 / F82 / F83

4.5 mm depth adapter for installing a BLAM BM200W 200 mm subwoofer in the original HiFi enclosure of a BMW F34 3 Series Gran Turismo. Use cabin-rated material, isolate wiring and connectors, and verify secure fit and unobstructed speaker operation.

Fits 3 Series · F30 / F31 / F34 / F80

Two-piece open- or closed-loop umbrella mount demonstrated on the inside of an F31 Touring boot lid. Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed vehicle operation.

Fits 3 Series · F30 / F31 / F34 / F80

F30 cup-holder organizer for a garage-door remote, coin, keys and other small cabin items. Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed vehicle operation.

Fits 3 Series · F30 / F31 / F34 / F80

Small removable coin cup printed for the recessed BMW F30/F31 center cup holder. Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed vehicle operation.

Fits 3 Series · F30 / F31 / F34 / F80

Cup-holder insert that steadies slim beverage cans and raises a small fragrance tin for easier removal in BMW F3x interiors. Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed vehicle operation.

Fits 3 Series · F30 / F31 / F34 / F80

Adapter for installing a universal 100 mm speaker in the original BMW F30/F31 speaker location. Use cabin-rated material, isolate wiring and connectors, and verify secure fit and unobstructed speaker operation.

Fits 3 Series · F30 / F31 / F34 / F80

Replacement storage tray for the center-console cavity left after removing the factory phone cradle in a 2013 BMW 320. Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed vehicle operation.

Fits 3 Series · F30 / F31 / F34 / F80

I added a 29mm cigarette lighter hole and a bmw logo on top of Fix3D:s model. You should probably use the original model's slicer settings. I used mostly default settings and the print could have come out better:) The bottoms of the holes are pretty thin and the other one broke on me while removing from the print bed, so I printed some BMW coasters with a diameter of 65mm and put them in the holes to hold the drinks. Printed in PETG basic Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed operation.

Fits 3 Series · E90 / E91 / E92 / E93

A friend of mine has an E90 and lost the clips that hold the (rear) window shades in, he was looking everywhere for them and couldn't find any at a reasonable price so I had a crack and modelling and printing them for him. They're pretty close to the original design and have similar properties when printed with PETG. I thought I'd share the model in case anyone else is also struggling to find them. If you encounter any issues let me know and I'll tweak the design for you. I'm unsure of their BMW part number, but the sun shade is 51462359741 . Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed operation.

Fits 3 Series · E90 / E91 / E92 / E93

This replacement clip is designed for the BMW E9x M3 (E90, E92, E93) center console shifter boot. If your shifter boot keeps detaching or won’t stay secured, this clip is the perfect solution. Installation: This clip must be glued in place where the original clip was broken off. Once installed, it restores a snug fit and keeps your shifter boot securely attached. Features: Perfect Fit: Precisely modeled to match OEM dimensions for a secure hold. Durable Material: Recommended to print in PETG or ASA for strength, heat resistance, and longevity. Easy Repair: Simply glue it where the original clip was — no modifications needed. OEM-Style Design: Matches original fit and function without compromising appearance. Compatibility: BMW E90 M3 BMW E92 M3 BMW E93 M3 Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed operation.

Fits 3 Series · E90 / E91 / E92 / E93

Connector housing for retrofitting door courtesy-light projectors to a BMW E90 that was not equipped with the factory lighting package or wiring. Two models are included to fit the courtesy-light unit; the creator used the larger version. For the electrical connection, the creator used the female side of an electronics pin header at the lamp and soldered positive and negative wires to the male side, insulating the joints with heat-shrink tubing. An editable SketchUp file is included. Use automotive-rated wiring and connectors, retain fuse protection, insulate every terminal, and verify unobstructed door and window operation.

Fits 3 Series · E90 / E91 / E92 / E93

This connector moves all the louvers in the vent together. Originally is made of metal and super thin. Printed with 100% infill Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed operation.

Fits 3 Series · E90 / E91 / E92 / E93

This is a cover to replace the 12v point in the boot/trunk of an E91 ( check for other models similar) with a blank plate. For fitment insert widest plastic tap to top and tap/hammer upwards. Then support the plastic of car from behind and push/hammer in. Push down to seat and stop it falling out. Cleaning up of carpet and plastic edge of hole may be required. Use cabin-heat-resistant material, dry-fit the part and verify secure retention and unobstructed operation.

Fits 3 Series · E90 / E91 / E92 / E93