Find your next part.

Multipart suspension-lift spacer kit for non-Nivomat P2 chassis applications. Includes 25.4 mm front and rear top-hat spacers, a rear spring spacer, and 25.4 mm subframe-drop spacers; the selected files include a one-piece full subframe set. The combination raises the vehicle and the subframe spacers help correct driveline angles after larger lifts. Verify suspension variant, spacer thickness, replacement-bolt lengths, torque, geometry, clearances, print strength, and safe operation before driving.

Fits XC70 · First generation · XC70 · Second generation

Full-size replacement frame that retains a manual-transmission shift boot in the center console. Reuse the original boot by removing it from the broken frame and bonding it to the printed frame with cyanoacrylate. Verified fitment includes Volvo V50 first generation (2003-2012), S40 second generation (2003-2012), C30 first and only generation (2006-2013), and C70 second generation (2005-2013), for applicable manual-transmission variants. Use a heat-resistant material suitable for vehicle interiors and verify dimensions, trim engagement, boot attachment, and secure retention before driving.

Fits C30 · First and only generation · C70 · Second generation · S40 · Second generation +1

Functional full-size replacement plastic fitting for the Volvo C30 crankcase-ventilation system, assigned to Volvo C30 First and only generation (2006–2013). The source identifies the exact C30 fitment and creator Vebjørn Matre Fosse; public search evidence describes PETG use. Attribution is required under the source’s Creative Commons — Attribution license. Verify engine variant, dimensions, material suitability, and secure fit before use; this is not a verified OEM part.

Fits C30 · First and only generation

Printable replacement rear sway-bar bushing for the first-generation Volvo XC90 (live catalog generation 1751, 2002–2014). The creator specifies solid TPU printing and recommends printing solid for durability; verify sway-bar diameter, bracket fit, material suitability, and installation before use.

Fits XC90 · First generation

Full-size replacement fuel-line pipe clip for the Volvo XC60 First generation (2008-2017), based on the creator's statement that a friend's Volvo XC60 fuel-line clip broke and this design was made as a replacement. The creator specifies PETG, 50% infill, and supports. Verify the exact vehicle generation, fuel-line routing, clip retention, hose diameters, heat and chemical exposure, print orientation, and clearance before installation or road use. Attribution, noncommercial use, and ShareAlike restrictions from the source apply exactly.

Fits XC60 · First generation

Two-piece functional repair for the Volvo M56 manual-transmission shifter: replacement pivot ball-seat/bushing (Volvo 9183908) and retaining shift clip (Volvo 8636988). The creator models it for a 2001 Volvo XC70 and reports compatibility with other Volvo M56/M66 manual-transmission applications using the same shifter lever. Creator guidance says ABS works and nylon is probably better; do not use carbon-fiber nylon because it is abrasive and can wear the ball joint. Verify dimensions, transmission, fit, retention, and safe operation before driving.

Fits XC70 · First generation

Full-size printable intake pipe/adapter for the original mass-airflow sensor on the Audi A3 8L (1996–2003), using the original screws. Marsa reports PETG, 0.28 mm “superdraft,” and 100% infill. The source warns that fitment and safety are not guaranteed and says an ignition-amp heatsink may be needed to keep it cool.

Fits A3 · 8L

Left and right paddle-shift extenders for Mazda6 (GJ). The creator notes that sanding may be needed at the mounting part.

Fits Mazda6 · Third generation (GJ/GL)

Protective key-fob shell for a 2015 Mazda CX-5. The source provides Type 1–4 alternatives.

Fits CX-5 · First generation (KE)

Custom bracket for an NA, left-hand-drive Miata flex-fuel sensor, mounting beside the fuse box in the engine bay at the washer-reservoir location. The creator specifies two M6x1.0 flange bolts.

Fits MX-5 · First generation (NA)

Mechanical anti-removal lock for the ATM.EVs Brazilian US-to-CCS2 adapter; creator tested only on a 2022 Model Y.

Fits Model Y · First generation

Mechanical lock for the J1772 adapter; creator states it works with Model S/X flange adapters and Model 3/Y.

Fits Model 3 · First generation · Model S · First generation · Model X · First generation +1

Replacement air-box cover clip piece for Volvo P2 cars, including the 2001–2007 V70. The source says it hinges the air-box clip to the box.

Fits V70 · Second generation

I have bought white/yellow WY21W switchbacks for DRL on my 06 Outback. I do not like to see connector unprotected or covered by electrical tape. So I made simple cover that also hold resistor (M3 screw) and could by mounted with M6 bolt or ziptie. Hole for wires is sealed with hot glue / silicon sealant. On left side I had some empty holes on bracket behind batery so I could mount it with screw. On righ side I had to mount it with zip tie on back side of bracket between headlight and airbox.

Fits Outback · Third generation (BP)

a shortram like K&N 69 Typhoon sportairfiltersystem for SUBARU FORESTER (SG) 2.5 XT / 69-8002TS ( https://www.knluftfilter.com/69-8002ts-performance-air-intake-system ) its fittet for 100mm K&N airfilter original MAF sensor

Fits Forester · Second generation (SG)

Replacement bushing for the Aerostar lower transmission crossmember.

Fits Aerostar · Aerostar

Sleeve for fitting a 66 mm aftermarket shift knob to the factory gaiter. The source explicitly identifies 2013-2014 fitment and notes that supports leave marks that may benefit from finishing.

Fits Mustang · Fifth generation

Replacement hinge pin for a missing fusebox hinge. PETG is inferred for toughness and electrical-box service conditions; ABS is an alternative for higher heat. Verify hinge travel, retention and electrical clearance.

Fits 159 · Tipo 939

Replacement cover for the battery power-terminal box. Confirm cable clearance, latch engagement and electrical isolation before use. ABS is inferred for engine-bay heat and rigidity; ASA or a suitably rated engineering polymer are alternatives.

Fits 159 · Tipo 939

Protective replacement cap for the Alfa Romeo 156 shock-absorber top. The creator only says it might fit Alfa 147 and GT, so those generations are withheld. ABS is inferred for exterior/under-bonnet heat, moisture and impact; PETG is an alternative.

Fits 156 · Tipo 932

Two-piece replacement cover for the high-tension ignition leads where they run toward the ignition coils on the 1992–1997 Alfa Romeo 155 Q4. The lower structure is retained by the standard large countersunk screw; the plain top cover uses two recessed M3 socket-head bolts. Do not overtighten the bolts, and verify clearance from hot and moving engine components before use.

Fits 155 · Tipo 167

Replacement small cover for the central relay board between the two relay boards behind the radiator. The creator identifies a 1992 Alfa Romeo 164 V6 2.0 Turbo; compare the original cover and relay-board layout before installation.

Fits 164 · Tipo 164

Replacement large cover for the pair of relay boards behind the radiator. The creator identifies a 1992 Alfa Romeo 164 V6 2.0 Turbo and exact source part number 164.00.40.852.01; compare the original cover and relay-board layout before installation.

Fits 164 · Tipo 164

Clip for 7.5 mm Lumenition Performance high-tension ignition leads used on Alfa Romeo Tipo 105 cars. Confirm lead diameter, avoid sharp bends, and keep the clip clear of hot or moving engine components.

Fits 1750 / 2000 Berlina · 1750 Berlina (105.48) · 1750 / 2000 Berlina · 2000 Berlina (105.12) · Giulia · Tipo 105 / 115 Berlina +5