Find your next part.

Three-part MagSafe charger mount for a non-smoker center console. The holder and two legs friction-fit between the rear metal trim and front rubber lip, keep both cupholders and the parking brake accessible, and accept the creator-specified 2024 Apple 25 W MagSafe Charger with braided cable.

Fits Macan · 95B

Ashtray-replacement cupholder for the late-style interior. The fixed right lip slides over the existing mount and a printed plug retains the left side, while the cupholder section remains removable when not in use.

Fits 944 · 944

Cup-holder stand sized for an iPhone 13 Pro or iPhone X and designed around a BENKS Magnetic Wireless Charger Cooler Radiator for wireless charging and thermoelectric cooling. The creator specifies a USB-C car adapter rated at least 20 W and uses 3M VHB tape to take up cup-holder clearance.

Fits 911 · 992

Cupholder-mounted MagSafe phone stand for PDK interiors with the deeper cupholder slot. The creator recommends PLA+ or carbon-fiber PLA and states the design was tested only on the 992.2.

Fits 911 · 992

Four-piece ashtray-slot phone mount for a Samsung Galaxy S22 Ultra with Samsung's Standing Protective Cover. The TPU/FLEX base and wedge fit the front ashtray without clips, adhesive, or vehicle modification; the creator specifies ABS or PETG for the heat-exposed arm and body.

Fits Panamera · G1 (970)

Replacement retaining button for the jack housing in the front luggage compartment, modeled after the original button was missing.

Fits Boxster · 981

Flat-backed replacement clip for retaining a front dashboard tweeter when the original plastic clip has become brittle.

Fits 911 · 996 · Boxster · 986

Replacement lever for the electric sunroof latch. The creator reports that a printed and installed version works; the second, fixed STL is the latest version and uses a solid peg after the split design repeatedly broke.

Fits 924 · 924 · 944 · 944

Center-console tray for an Anker 15W PowerWave Alloy charging pad, sized for a cased Samsung S20+. Includes an editable tray model and a separate TPU underlay to protect the console; the creator installs both after removing the factory rubber liner.

Fits 911 · 991 · Boxster · 981 · Cayman · 981

Plastic latching receptacle that fits into the front luggage-compartment battery bracket and receives the quarter-turn battery-cover screw plug.

Fits 911 · 996 · Boxster · 987

Four-piece ashtray-insert phone mount for 2010-2016 970.1/970.2 cars, designed around the Asus ROG Phone II. The flexible base and wedge friction-fit in the ashtray while the rigid arm and body bolt together; installation uses no clips, adhesive, or vehicle modifications.

Fits Panamera · G1 (970)

An iPhone X holder shaped to fit the center-console power-outlet opening.

Fits Macan · 95B

Dual can holder with a rectangular base and raised retaining walls, designed and test-fitted by the creator in a 2001 Boxster S 986.

Fits Boxster · 986

Separate front-dashboard and rear rings for mounting 4-inch replacement speakers. The front and rear geometries differ, and installation requires cutting the new speakers' mounting tabs and bonding their outer rings to the adapters.

Fits 911 · 996

Rear-seat cigarette-lighter replacement panel for installing aftermarket power ports while reusing the original plate screws.

Fits Cayenne · E1 (955 / 957)

Finishing fascia for an Android two-DIN radio in the 159. The creator gives an 11.5 × 19.2 cm radio size, a 13 × 20.2 cm dashboard opening, and printed it in black PETG.

Fits 159 · Tipo 939

Adapter for mounting a standard tweeter on the original 145 tweeter mount. The creator glued the tweeter to the adapter and removed the front grille and bent the tweeter wire pins to fit the available space.

Fits 145 / 146 · 145 / 146 (Tipo 930)

Can holder sized for a 0.5-litre, 67 mm can and designed for the 159.

Fits 159 · Tipo 939

Two-part replacement sun-visor retaining clip. The creator recommends printing the base on its side for strength and using ABS because PLA may fail at cabin temperatures.

Fits 156 · Tipo 932

Clutch-alignment tool for Lampredi two-litre twin-cam engines, explicitly including the 155 Q4. The creator notes that a printed tool is suitable for occasional use.

Fits 155 · Tipo 167

Replacement cover for the Bosch idle-control valve sensor used on the 156 and 166. The creator designed it because the original cover is discontinued separately from the complete sensor.

Fits 156 · Tipo 932 · 166 · Tipo 936

Replacement clip for the soft-top hood bag/tonneau cover.

Fits Spider · Series 3 (Tipo 115)

Printable left- and right-side map-pocket shells, back plate, and edge trims intended to be covered with vinyl; the back plate is made from 1–1.5 mm aluminium sheet.

Fits Giulia GT / GTA · Tipo 105 / 115 Coupes

Panels, connector cap, and switch plate for relocating an OBD-II socket inside the driver-side storage compartment while allowing the compartment to close.

Fits MiTo · Tipo 955