Find your next part.

A printed base that holds an Apple MagSafe charging puck in the storage cubby behind the shifter of the 2022+ VB WRX. The puck sits slightly proud of the base to clear phone-camera bumps. Attach the puck to the base and the base to the rubber tray with VHB tape, route cable slack beneath the base, and leave clearance at the left side for the phone and USB-C plug.

Fits WRX · Second generation (VB)

Right-side spring-loaded support peg for the retractable rear cargo cover. It replaces the broken peg at the right mounting point and restores the cover’s retention. The included component is the solid-shaft version 2 for the right side; the opposite side uses different shaft geometry. Print on its side with supports for shaft strength. PETG or ABS is recommended for automotive heat exposure. Verify the 2009–2014 fourth-generation Outback side, mating interface, fit, and retention before use.

Fits Outback · Fourth generation (BR)

Full-size storage bin that clips around the retaining features of a driver-side fuse-panel lid and provides a compartment for keys, spare fuses, cash, or other small items. Designed for fuse-lid part number 66135AJ020 and verified for the accepted Subaru generation IDs. Print the selected geometry in PETG for improved resistance to heat inside a vehicle; reorient the model flat on its base and verify clip engagement, clearance, and retention before use.

Fits Ascent · First generation (WM) · Forester · Fourth generation (SJ) · Forester · Fifth generation (SK) +8

17 mm ball adapter for a compatible phone-holder cradle. The flat mounting plane attaches to the inside edge of the center console with multipurpose mounting tape, and the spherical interface accepts phone holders using a 17 mm mounting socket. Includes the printed adapter only; mounting tape and phone holder are separate. Verified fitment is the first-generation BRZ center-console location represented by generation 1229; verify console surface, tape retention, holder engagement, clearance, and unobstructed controls before driving.

Fits BRZ · First generation (ZC6)

Interior fuse-box cover for the driver-side lower-dash fuse-box location on the sixth-generation Subaru Outback. Two variants are included: one with an opening for adding buttons or switches and one with a closed face. Verify the vehicle cover geometry and any switch dimensions before installation.

Fits Outback · Sixth generation (BT)

Two-piece overhead map-light accessory switch mount for the 2008-2011 Impreza and 2008-2014 WRX/STI. It mounts four generic 22 x 38 mm rocker switches ahead of the map light, uses the factory map-light bezel screws, and supports optional fastening to the upper windshield frame. The selected set includes the upper bracket, a holey bucket with access holes for hard-mounting, and an editable STEP version. Supports and minor filing or redrilling may be needed; PETG or another heat- and UV-resistant material is recommended for in-vehicle use.

Fits Impreza · Third generation (GE/GH/GR/GV) · WRX · First generation (VA)

Single-piece center-console cup-holder insert for the 2001 Subaru Impreza. It drops into the center-console opening, adds a round recess for larger drink vessels, and retains a small adjacent storage pocket. Verify console variant, final scale, clearance, retention, and heat suitability before driving.

Fits Impreza · Second generation (GD/GG)

Replacement left- and right-side covers for the front headlight-washer nozzle openings. The side-specific files fit Subaru Legacy IV sedan and station wagon applications from 2003-2009 and Subaru Outback III applications from 2003-2009, including the Outback sedan from 2004-2009. The left and right covers correspond to OE identifiers 86636AG260 and 86636AG250; select the file matching the vehicle side. Use a heat- and weather-resistant material suitable for exterior automotive service.

Fits Legacy · Fourth generation (BL/BP) · Outback · Third generation (BP)

Cap-style oil-filter removal wrench for vehicles using Subaru filter 15208AA15A. It seats around the filter canister to aid hand removal during oil changes; verify the filter number and fit before applying torque. The packet contains one wrench geometry.

Fits Ascent · First generation (WM) · Forester · Third generation (SH) · Forester · Fourth generation (SJ) +12

Friction-fit inserts for the front and rear center-console cup-holder positions of the second-generation WRX. They reduce movement for slim 12 oz cans such as standard energy-drink cans. The V2 variant is intended for the front position and the V3 variant for the rear; print the required variant for the position being used. PETG or ABS is recommended for better heat resistance in a vehicle interior.

Fits WRX · Second generation (VB)

Full-size cylindrical spacer that drops into the front center-console cup-holder opening to raise the base for shorter cups and mugs. The verified source fitment covers the 2019-2025 Outback model-year span represented by the selected live generations. Print as one piece; creator guidance specifies PLA at 15% infill.

Fits Outback · Fifth generation (BS) · Outback · Sixth generation (BT) · Outback · Seventh generation (BT2)

Pair of full-size left- and right-side headlight-washer nozzle covers for the front bumper of the 2009–2014 Subaru Legacy BM/BR. The separate covers replace missing exterior caps over the headlight-washer outlets; verify nozzle tabs, bumper opening, side orientation, and paint or finish before installation.

Fits Legacy · Fifth generation (BM/BR)

Printed mount for securing a small motorcycle clutch-fluid reservoir in the engine-bay hydraulic-clutch installation of a manual-converted 1991–1996 Subaru Alcyone SVX. The geometry provides the reservoir mounting interface; verify reservoir dimensions, fastener engagement, clearances, fluid compatibility, print strength, and secure retention before operation.

Fits Alcyone SVX · First and only generation (CX)

Two-piece center-tray wireless-charger enclosure consisting of a base and top cover. It fits the center tray of the 2022-2025 Subaru WRX VB, holds a separate wireless charging puck, retains a phone, and conceals the power cable. The top relief accommodates a Google Pixel 8 Pro in an OtterBox Symmetry case. Includes the base and top cover STL files; charging electronics and installation hardware are not included. Verify phone, charger, cable, console clearances, and cabin-temperature material suitability before installation.

Fits WRX · Second generation (VB)

Right-hand rear cargo-cover catch/support for the first-generation Outback/Legacy wagon cargo-cover assembly. Replaces the original screw-mounted catch and retains the retractable cargo cover; mirror the model for left-hand use. Print with supports as needed and use a heat-resistant material such as PETG or ABS for vehicle interior temperatures.

Fits Outback · First generation (BG)

Female replacement clip for the all-weather rear-seat covering on the 2009–2014 vehicle generation represented by generation ID 1209. It replaces the broken female sides while the existing male screw-like portion remains in place; the printed clip is approximately 25 mm in diameter. Print in PETG or ASA using metric units, and verify fit, engagement, and retention before installation.

Fits Outback · Fourth generation (BR)

Full-size functional adapter that clips into the bottom of a Momo Race Air gear knob and retains the leather shift boot/gaiter beneath the knob. Fitment is source-backed for a 2002 Subaru WRX within the second-generation Impreza GD/GG application represented by generation 1197. Print in PETG for cabin heat resistance, verify the knob and shifter interfaces before installation, and confirm secure retention before driving.

Fits Impreza · Second generation (GD/GG)

Firewall sound-generator delete plug that seals the opening left when the intake noise-generator tube is removed. Intended for the first-generation BRZ (ZC6); the cylindrical plug presses into the firewall opening. Print guidance specifies PETG or ASA at 20–30% infill for durability, with supports checked in the slicer.

Fits BRZ · First generation (ZC6)

Full-size two-section adapter for a factory front center-console cup-holder opening. It enlarges the opening to retain a 40 oz water bottle; the printed geometry has approximately 95 mm upper inner diameter, 70 mm lower inner diameter, and a 100 × 145 mm overall envelope. Use a heat-resistant filament such as PETG or ASA; the source print guidance specifies no supports.

Fits Impreza · Third generation (GE/GH/GR/GV) · Impreza · Fourth generation (GJ/GP) · WRX · First generation (VA) +2

Replacement latch for the lower center-console storage box on the second-generation Subaru Impreza (GD/GG), source-verified for the 2002 application. It restores the lid retention function using the existing console interfaces. The single included STL is intended for PETG or ASA for cabin heat resistance; verify console variant, latch engagement, clearances, and secure retention before installation.

Fits Impreza · Second generation (GD/GG)

Full-size dashboard storage cubby insert for the SG facelift dashboard opening, with an integrated opening for a separately sourced USB connector. It provides enclosed storage and clip-in mounting geometry; the USB hardware is not included. Fits the facelift variant within generation 1214; verify dashboard trim, connector dimensions, clearances, and secure retention before installation. PETG or ABS is recommended for cabin heat resistance.

Fits Forester · Second generation (SG)

Full-size cargo-area utility hook for the left and right side mounting points. It provides an attachment point for carabiners, bungees, straps, bags, a cargo net, or a utility bar and mounts with one M6 x 35 mm screw after the factory plastic cap is removed. A 1 mm felt or TPU buffer can cushion the hook against the trim. Verified fitment is the Subaru Forester sixth-generation SL application represented by live generation 1218 for the 2025+ mounting system. Verify vehicle-specific fit, screw engagement, trim clearance, retention, load suitability, and heat resistance before use; PLA is not suitable for hot-car stability.

Fits Forester · Sixth generation (SL)

Full-size replacement front fog-light mounting bracket assembly for 2021-2023 Subaru Crosstrek applications. The kit includes a tester bracket, base bracket, adjustment arm, optional adjustment-arm insert for an M5 x 70 mm screw, and alternate long or shallow fake-light bodies in standard, realistic, and stylized forms. The base bracket retains the fog light in the bumper receptacle; the adjustment arm accepts the stock plastic adjustment screw or optional M5 hardware. Print the base bracket with supports. PETG is the creator-specified material, and post-processing may be needed for the adjustment components. Verify the tester bracket before printing the final assembly and confirm trim, lamp, fastener, clearance, retention, and road-use requirements.

Fits XV / Crosstrek · Second generation (GT) · XV / Crosstrek · Third generation (GU)

Replacement latch for the center-console armrest lid. Restores the latch retaining and closing function for the 2015-2018 Subaru WRX STI center console; verify the latch geometry and engagement against the original part before installation. The source set contains one latch component.

Fits WRX · First generation (VA)