Find your next part.

Functional center-console drink holder for the Audi A3/S3 8L (1996-2003), secured with an optional screw. The creator specifies PETG and notes that it is incompatible with a console hand rest; verify clearance and retention before use.

Fits A3 · 8L

Full-size printable intake pipe/adapter for the original mass-airflow sensor on the Audi A3 8L (1996–2003), using the original screws. Marsa reports PETG, 0.28 mm “superdraft,” and 100% infill. The source warns that fitment and safety are not guaranteed and says an ignition-amp heatsink may be needed to keep it cool.

Fits A3 · 8L

Full-size replacement mounting clip for the 2017-2020 Audi Q5 FY headlight housing. The source reports that it was tested on the car, omits a locking tab that does not matter once the headlight is fixed, and requires two mounts per headlight. PA6-CF is the creator/platform recommended material and is mapped to the catalog Nylon material.

Fits Q5 · FY

Functional support bracket for the Audi TPMS module, mounted by the rear right wheel on Audi A4/S4/RS4 B9 vehicles. The source states PETG printing, supports as needed, and two small self-tapping screws for retention. Attribution required under the source CC BY 4.0 license.

Fits A4 · B9

Replacement mounting bracket/clip for the Audi TT 8S (MK3) side skirt/rocker panel, identified by the source as the second and third bracket positions counting from the rear wheel. The source reports that this component commonly breaks during side-skirt removal and cannot be bought separately. Creator attribution: jensrenner1980, Thingiverse thing:6208629. Source license: CC BY-4.0; retain attribution, license link, and change indication. Verify fit and fastener engagement before road use.

Fits TT · 8S

Full-size functional dash speaker adapter set for Audi A4/S4/RS4 B8 dashboard locations, sized for 75 mm speakers. The source supplies side and centre STL variants; print two side adapters and one centre adapter. The creator states that the part works with PLA and PETG. Verify the vehicle opening, speaker dimensions, mounting holes, clearance, and secure fit before use.

Fits A4 · B8

Left and right replacement hinges for the Audi A4 glove-box door, fitment evidenced for the 2004–2008 A4 B7 generation. The design is attributed to NikiKaccia and the original Thingiverse listing is CC BY-SA 4.0; any catalog rehosting must preserve attribution and ShareAlike. The source lists standard FDM settings of 0.2 mm layers and 70% infill, with supports as needed. Verify dimensions and fit before printing or installation.

Fits A4 · B7

Replacement wheel-arch-liner screw for the 2004-2011 Audi A6 4F (C6). The source recommends printing lying for strength with support; it lists PA6, mapped to the catalog Nylon material.

Fits A6 · C6

Replacement front ashtray insert for the Audi A3 8P center console (live catalog generation 1789, 2003-2012). The source recommends ASA and standard FDM settings of 0.2 mm layer height, 70% infill, and supports as needed; verify dimensions and fit before installation.

Fits A3 · 8P

Replacement radio surround frame for the Audi A3 8L (1996–2003), sized for a 188 × 60 mm autoradio opening. The source provides a free STL and standard FDM guidance; verify fit before installation.

Fits A3 · 8L

Front-door adapter bracket for mounting a 5.25-inch / 130 mm speaker at the factory mounting locations. The source includes a separate flexible seal file; mirror one bracket for the opposite door. The creator specifies four M3 threaded inserts, four M3 button-head screws, and three OEM mounting screws per bracket, and recommends ABS, ASA, or similar temperature-resistant filament for the bracket and TPU or similar flexible filament for the seal. Exact source fitment is 1994–2001 Audi A4 B5.

Fits A4 · B5

Cover for the mechanical backup key of a 2019 Mazda3. The creator reports FDM prototypes and an SLA print.

Fits Mazda3 · Fourth generation (BP)

Left and right paddle-shift extenders for Mazda6 (GJ). The creator notes that sanding may be needed at the mounting part.

Fits Mazda6 · Third generation (GJ/GL)

Replica end cap for the hood shock on B3 Audi 80/90 Coupé vehicles.

Fits Coupé · Coupé

Hub cap for original Audi 6J × 15 Aero alloy wheels.

Fits Coupé · Coupé

Replacement front hood-release handle for the Fiat Grande Punto.

Fits Fiat Punto · Third generation (Grande Punto / 199)

Protective key-fob shell for a 2015 Mazda CX-5. The source provides Type 1–4 alternatives.

Fits CX-5 · First generation (KE)

Replacement internal link connecting the selector lever to the cable that actuates the blend door in an NA Miata.

Fits MX-5 · First generation (NA)

Custom bracket for an NA, left-hand-drive Miata flex-fuel sensor, mounting beside the fuse box in the engine bay at the washer-reservoir location. The creator specifies two M6x1.0 flange bolts.

Fits MX-5 · First generation (NA)

Vehicle-specific wireless Qi charger assembly for Tesla Model S and Model X, designed for an IKEA LIVBOJ charger.

Fits Model S · First generation · Model X · First generation

Non-permanent, Command-Strip-mounted MagSafe phone mount specifically described for Tesla Model S.

Fits Model S · First generation

Mechanical anti-removal lock for the ATM.EVs Brazilian US-to-CCS2 adapter; creator tested only on a 2022 Model Y.

Fits Model Y · First generation

Mechanical lock for the J1772 adapter; creator states it works with Model S/X flange adapters and Model 3/Y.

Fits Model 3 · First generation · Model S · First generation · Model X · First generation +1

Custom mounting grapple, platform, locking ring, and adapter for the auto-dimming/Homelink rear-view mirror in a 2008 Subaru Outback, intended to support a dash camera or other accessories.

Fits Outback · Third generation (BP)