Find your next part.

Replacement adjustment knob for BMW E30 M-Sport seats, physically shown as a finished print. Match the seat shaft and verify secure engagement before use.

Fits 3 Series · E30

Left and right repair tabs for cracked E30 instrument-cluster mounting ears, test-fitted against an intact cluster and documented for screw or adhesive installation. Align the tabs in the dash before removing the damaged originals.

Fits 3 Series · E30

Replacement plastic grommet used at E30 grille and rear license-plate mounting points, physically compared with the original. The creator also lists E36, E46, E90 and E92 applications; BMWFans confirms grommet 51131840154.

Fits 3 Series · E30 · 3 Series · E36 · 3 Series · E46 +1

Replacement cap for E30 front seat-belt anchorage bolts, copied from the original and physically fitted on stock, sport and Recaro seats. BMWFans confirms covering cap 72111808464. Do not disturb or conceal a loose anchorage bolt.

Fits 3 Series · E30

Straight and 90-degree two-piece shells for repairing disintegrated 2.5 mm watertight terminals on BMW E30, E36 and E46. The source shows completed physical connectors. Bond with suitable RTV and verify terminal lock, polarity, insulation and sealing.

Fits 3 Series · E30 · 3 Series · E36 · 3 Series · E46

Replacement fastener for E30 front-seat side covers, copied from the original and physically compared. It supports stock, sport and Recaro seats; BMWFans confirms push-button 52101906933.

Fits 3 Series · E30

Replacement cap for the E30 luggage-compartment jack mount, copied from the original and physically installed. BMWFans confirms cover 51711916269.

Fits 3 Series · E30

Replacement side covers for BMW Reverse RDS, non-RDS, Bavaria and Business radios used in E30, E32, E34 and E36. The source shows physical fit and finish; BMWFans confirms covering cap 65126907823.

Fits 3 Series · E30 · 3 Series · E36 · 5 Series · E34 +1

Replacement front-strut top dust cover for E30 cars fitted with Koni adjustable dampers where the stock cover does not fit. The creator printed and used the PETG version; confirm adjuster clearance and cap retention.

Fits 3 Series · E30

Two replacement plastic pieces for the late-model E30 headlamp adjusting screw, copied from the originals and shown assembled on the screw. BMWFans confirms adjusting screw 63121385397. Form threads carefully and verify beam adjustment and retention.

Fits 3 Series · E30

Reinforced replacement lower wiring cover for E30 door mirrors, copied from the original and physically fitted. The supplied geometry is LHD; mirror it for RHD. BMWFans confirms left/right LHD 51161937441/442 and RHD 51161937443/444.

Fits 3 Series · E30

Replacement E30 front-strut wiring holder copied from the original and physically installed. BMWFans confirms cable holder 61131370421. Use heat- and abrasion-resistant material and verify wire clearance through full steering travel.

Fits 3 Series · E30

Replacement gear set for BMW E30 MotoMeter odometers, shown against and installed in a physical cluster. Gear numbers in the source are creator labels, not BMW component numbers.

Fits 3 Series · E30

Replacement high-beam headlamp spacer for both Hella and Bosch E30 lamp frames, reproduced from the original and physically fitted. BMWFans confirms intermediate piece 63121362036.

Fits 3 Series · E30

Replacement E30 ignition-lock trim ring reproduced from a broken original and shown fitted. BMWFans identifies ring 32311162057. Confirm steering-column trim version and do not obstruct key or lock-cylinder movement.

Fits 3 Series · E30

Replacement headliner bracket supporting the dome light in an E30 coupe, physically compared with a failed original and installed. It is not claimed for convertible bodies; sedan fitment was not independently established. BMWFans confirms bracket 54121884483.

Fits 3 Series · E30

Reinforced fastening repair for the E30 centre-side or B-pillar trim cover, copied from the original attachment and intended to be bonded to the broken cover. The creator-listed 51431933731/732 references are parent trim covers, so no OEM number is assigned.

Fits 3 Series · E30

Straight and 90-degree reusable molds for rebuilding disintegrated overmolded BMW E3x electrical terminals with hot glue or a suitable insulating compound. The source includes a repair write-up; preserve terminal alignment and verify insulation and water resistance before connection.

Fits 3 Series · E30

Inner and outer replacement covers for E30 headrest-post openings. The creator reports they function, though less precisely than the originals. BMWFans identifies the matching inner and outer covers as 52101838969 and 52108191245; verify position before fitting.

Fits 3 Series · E30

Replacement trim cover for exposed E30 seat-rail and seat-belt anchorage nuts. Match the installed fastener size and ensure the cover does not interfere with seat travel or belt hardware.

Fits 3 Series · E30

Four-part replacement centre-cap system for 15-inch BBS RZ Style 5 wheels used on E30. The creator prototyped and fitted it, documents assembly and temperature-resistant materials, and advises checking the printed nut position regularly. The separate 68 mm badge number is intentionally omitted.

Fits 3 Series · E30

Replacement bushing for the E30 wiper-arm pivot on the passenger side of LHD cars or driver side of RHD cars. It is dimensioned for the standard M22×5.5 nut and physically fitted; BMWFans identifies 61611370387 as the corresponding covering cap.

Fits 3 Series · E30

Two-piece replacement cover and holder for securing the spare wheel in the E30 luggage compartment, shown physically installed. Confirm thread engagement and wheel retention before driving.

Fits 3 Series · E30

Replacement electrical connector housing for the classic Alpina vent gauge, designed around BMW 2.8 mm crimp terminals and compared with the original connector. Match terminal locking and pin order to the vehicle wiring before energizing.

Fits 3 Series · E30