C3D–01955Right Headlight-Washer Cover with Forming Jig
Passenger/right headlight-washer cover with tabs and a companion jig used to heat-form the cover to the compound curve against the headlight housing.
Fits 911 · 996
The parts catalog
Find your fit. Download a free file or choose a maker to print and ship your part.
60 matching parts
Free files. Made for your car.
C3D–01955Passenger/right headlight-washer cover with tabs and a companion jig used to heat-form the cover to the compound curve against the headlight housing.
Fits 911 · 996
C3D–01948Replacement flap for the fresh-air blower housing. The creator used a 4 mm foam-rubber seal and PETG for the heat encountered during cabin heating.
Fits 911 · G Model
C3D–01946Printable camshaft holding-down tool for early five-chain engines in the Boxster 986 and 911 996. The tool holds the camshafts during cylinder-head-cover removal and reassembly.
Fits 911 · 996 · Boxster · 986
C3D–01945Full-size 15.25-inch template for cutting replacement side-section stone-guard film, modeled for the 997 generation.
Fits 911 · 997
C3D–01939Adapters for 4-inch door and rear midrange drivers plus a two-piece Dynaudio MD-102 tweeter mount. The source covers Dayton Audio RS100/RS100P and Dynaudio E430 midranges; the tweeter mount requires Burmester grilles or modified Bose/SPP grilles and its two pieces are bonded before installation.
Fits 911 · 991
C3D–01931Left- and right-side repair tabs for broken pollen-filter covers. Replacement variants are for missing original tab pieces; over-top variants wrap available broken pieces or reinforce intact tabs before being glued in place.
Fits 911 · 993
C3D–01930Three-piece installation set for an air-cooled rear main seal: a stock-hardware crankshaft centering guide, a punch that seats the seal flush with the case, and a second punch that seats it 1 mm below flush for a worn crank sealing surface.
Fits 911 · 964 · 911 · 993
C3D–01928Plug for the dashboard clock opening, originally made to accompany an in-car iPhone mount. The creator photographed a printed prototype and states compatibility from 1969 through 1989.
Fits 911 · Original (901/911) · 911 · G Model
C3D–01927Removable MagSafe phone mount that spans the top of the factory PCM screen. It holds the charging puck with 3M VHB tape, routes the USB cable toward the glovebox, and attaches using two 0.048-inch metal tabs.
Fits 911 · 991 · Boxster · 981 · Cayman · 981
C3D–01926Removable cup holder that screws to a padded center-console side panel with four M3 threaded inserts and four M3 screws. The holder slides upward off its bracket for full seat travel; the supplied orientation is for the right side and can be mirrored for the left.
Fits 911 · 996
C3D–01924Three-piece bracket set for attaching fiberglass bumpers to the original body mounting points. It includes front-center, front-side, and rear-side mounts; the center mount accepts a speed nut and M4 rivet nut, and the side mounts support bumper load. The creator states that it is not for road use.
Fits 911 · G Model
Flat-backed replacement clip for retaining a front dashboard tweeter when the original plastic clip has become brittle.
Fits 911 · 996 · Boxster · 986