Find your next part.

Replacement cap for the rear center armrest/backrest interface. It has an internal keyed opening and retaining features, installs in the correct orientation, and restores the cap location on the 2001–2008 Forester applications represented by the live catalog generations. Secure with suitable adhesive if needed. Use a heat-resistant material appropriate for a vehicle interior; ASA is the source recommendation.

Fits Forester · First generation (SF) · Forester · Second generation (SG)

Larger headlight cover for 2003-2005 Subaru Impreza GD/GG Blobeye headlight assemblies when LED lights are installed. Reuse the original seal rings. The model provides one cover; use an automotive-temperature filament appropriate for the installation environment.

Fits Impreza · Second generation (GD/GG)

Two-cup holder with cylindrical drink recesses and a rear mounting plate for the specified first-generation Subaru Impreza cup-holder area. It is intended to hold beverages during vehicle use. Verify the specific interior/console variant, retention, clearances, and heat-resistant print material before installation.

Fits Impreza · First generation (GC/GF/GM)

Flexible replacement grommet that retains the hood support rod at the front hood mounting point. Verified applications include the listed Impreza, Legacy, Outback, Forester, and Baja generation IDs; compare the original opening and rod diameter before installation. TPU is the intended material, and this work-in-progress design should be inspected for secure retention before vehicle use.

Fits Baja · First and only generation (BT) · Forester · First generation (SF) · Forester · Second generation (SG) +11

Six source-authored STL variants for repairing the convertible headliner mounting interface on the Volvo C70 second generation (2005-2013). The set contains the creator-named G/P receiver types in three forms: base, versions with four removable printing-stability fins, and versions with an included clip plus a lower adhesive hole. Print in ABS as oriented, without supports, at 100% infill; verify the receiver profile, front/rear position, retention, and adhesive before installation.

Fits C70 · Second generation

Flexible replacement insert for the rear-seat armrest drink holder. It restores the retaining tabs that hold smaller-diameter drink bottles, using a press-fit insert that can be secured with clear silicone; trim remnants of broken original tabs before installation. The documented applications are V60 2015, V70 2008-2010, XC60 2010-2017, and XC70 2008-2014 within the corresponding live catalog generations. Print with flexible TPU; the insert may remain removable when larger containers are needed.

Fits V60 · First generation · V70 · Third generation · XC60 · First generation +1

Full-size adapter for mounting a compatible reverse camera in the rear license-plate-light opening of the Volvo V70 Third generation (2007-2016). The model is the printed adapter geometry; the camera, lamp hardware, wiring, and display are separate components. Verify the camera dimensions, mounting points, lamp opening, connector and wiring, clearances, sealing, and image orientation before installation, and use a weather- and heat-resistant material suitable for exterior automotive service.

Fits V70 · Third generation

Full-size cupholder insert that attaches to the rear of the original center-console storage tray with double-sided tape and holds a European 330 ml can. Verified fitment is the P1800/1800S/1800E/1800ES center-console storage area represented by live generation 1716; compatibility with other Volvo lines or generations is not established. Verify tray dimensions, tape retention, can clearance, and heat-suitable material before driving.

Fits 1800 · P1800/1800S/1800E/1800ES

Replacement battery-cover retaining clip for Volvo P3-platform vehicles. Restores battery-cover retention when the original clip breaks or loses holding strength. Verified fitment includes second-generation XC70, second-generation S80, and first-generation XC60. PETG is recommended for durability and temperature resistance; verify the battery-cover variant, clip engagement, clearances, and secure retention before use.

Fits S80 · Second generation · XC60 · First generation · XC70 · Second generation

Full-size replacement blend-door linkage arm for the HVAC system in the Volvo 850, replacing the brittle plastic arm that restores heater and air-conditioning blend-door operation. Verified source fitment covers the 1993–1996 overlap within the live 850 generation taxonomy. Verify HVAC variant, linkage orientation, pivot and rod interfaces, clearances, and secure operation before driving.

Fits 850 · 850

Two-piece full-size replacement headlight mounting bracket for the second-generation Volvo XC90 (2015-present). The printed parts provide mounting interfaces for the headlamp assembly; verify the vehicle side, headlamp/trim variant, clearances, retention, and installation hardware before fitting. Use a heat- and weather-resistant material appropriate for the installation environment.

Fits XC90 · Second generation

Replacement cylindrical bushing for the lower torque-mount/dog-bone assembly on a 2008 Volvo XC90 D5. The part has a central sleeve bore and is intended to replace the worn bushing in the existing mount; verify the sleeve and hardware fit, press fit, dimensions, material hardness, and installation before use.

Fits XC90 · First generation

Full-size replacement clip for securing the door weather seal to the door aperture on the first-generation Volvo S90 (2016-present). The clip restores retention of the seal; verify the exact seal profile, clip orientation, fit, and secure door operation before installation. PETG is the creator-specified print material.

Fits S90 · First generation

Full-size dashboard mounting set for installing a Sony XAV-AX5500 2-DIN head unit in the Volvo 940 dashboard. The set includes the main radio frame, a magnet-attached glare hood, and a locking piece for rear retention. The hood requires four 8 × 2 mm rare-earth magnets and may interfere with head units whose dimensions extend into the double-DIN opening. Use a cabin-temperature-capable material, and verify the dash opening, mounting holes, fastener engagement, magnet polarity, head-unit clearances, and retention before installation.

Fits 940 · 940

Flexible TPU rubber mount/bushing for securing an engine cover. The cylindrical insert provides a compliant locating and isolation interface at the engine-cover mounting opening. Fitment covers the live S60 I/II, V70 II/III, S80 I/II, XC70 I/II, XC90 I, C30, C70 II, S40 II, V50 I, V40 II, V60 I, and XC60 I generations listed below; verify engine variant, dimensions, quantity, and retention before installation.

Fits C30 · First and only generation · C70 · Second generation · S40 · Second generation +13

Replacement protective cover for the detachable tow-bar receiver holder on Volvo V70 Second generation (2000-2007) and Volvo XC70 First generation (2000-2007) applications using the matching cover interface. The cover replaces a lost or damaged original, attaches to the existing holder, and includes a screw-and-nut retention provision to help prevent loss. Use a temperature-resistant material such as PETG; confirm the tow-bar/bumper variant and holder interface before installation.

Fits V70 · Second generation · XC70 · First generation

Ball mount for a compatible phone-holder cradle that attaches to the center dashboard vent/trim area of the second-generation V40 and provides a spherical interface for adjustable phone positioning. The design is full-size for in-car use; use ASA or another heat-resistant material because PLA may warp in hot vehicle interiors, and verify the mating holder, retention, dashboard clearance, and unobstructed controls before driving.

Fits V40 · Second generation

Multipart suspension-lift spacer kit for non-Nivomat P2 chassis applications. Includes 25.4 mm front and rear top-hat spacers, a rear spring spacer, and 25.4 mm subframe-drop spacers; the selected files include a one-piece full subframe set. The combination raises the vehicle and the subframe spacers help correct driveline angles after larger lifts. Verify suspension variant, spacer thickness, replacement-bolt lengths, torque, geometry, clearances, print strength, and safe operation before driving.

Fits XC70 · First generation · XC70 · Second generation

Replacement side hook/clip for the retractable cargo cover in the first-generation Volvo V50. The tested part retains the cover in the side-panel recess; the supplied geometry is for the passenger side, and the driver-side counterpart is produced by mirroring it. Print in PETG or another heat-resistant material; PLA may deform in hot summer conditions. Verify side orientation, fit, retention, and support-removal clearance before installation.

Fits V50 · First generation

Full-size rear reverse-light adapter set for installing a rotatable H7 LED bulb in the P2 reverse-light housing used by the Volvo V70N and first-generation XC70. The set includes the adapter, washer, and two lid variants with different hole sizes. Verify the exact socket and bulb dimensions, retention, heat resistance, sealing, clearance, and road-use legality before installation.

Fits V70 · Second generation · XC70 · First generation

Full-size two-cup console cupholder add-on for the empty center-console/storage box in Volvo S40 second-generation, V50 first-generation, and C30 first-generation applications. The assembled kit provides two 330 ml cup recesses and a narrow side storage slot; print the three components and glue them together. Installation may require removing the rubber at the bottom of the box. Verify the console-box variant, fit, retention, clearances, and heat-resistant print material before installation.

Fits C30 · First and only generation · S40 · Second generation · V50 · First generation

Replacement twist-lock fastener set for securing an exterior rear-window louver to the rear glass on Volvo 740 vehicles from 1984–1992. Includes a locking plate and locking nut; use the matching pair to retain the louver and verify the glass, accessory bracket, clearances, and secure engagement before driving.

Fits 740 · 740

Front license-plate adapter for a Swiss 30 x 8 cm plate on the Volvo EX30 First generation (2023-present). It reuses the original center screw, requires no front-end modification, and provides a standard M6 thread for the plate frame; installing it leaves four original mounting holes visible, which may be covered separately. Print with tree supports as directed and verify plate-frame clearance, screw engagement, retention, and exterior heat/weather suitability before driving.

Fits EX30 · First generation

Full-size functional tray for the front tunnel-console cupholder area of the Volvo XC90 second generation (generation 1752). It fits around the 12 V socket and adds a wall to separate and contain the two front cup wells. Verify the console variant, dimensions, outlet clearance, retention, and print strength before installation or use.

Fits XC90 · Second generation