Find your next part.

Replacement lever for the electric sunroof latch. The creator reports that a printed and installed version works; the second, fixed STL is the latest version and uses a solid peg after the split design repeatedly broke.

Fits 924 · 924 · 944 · 944

Center-console tray for an Anker 15W PowerWave Alloy charging pad, sized for a cased Samsung S20+. Includes an editable tray model and a separate TPU underlay to protect the console; the creator installs both after removing the factory rubber liner.

Fits 911 · 991 · Boxster · 981 · Cayman · 981

Four-piece ashtray-insert phone mount for 2010-2016 970.1/970.2 cars, designed around the Asus ROG Phone II. The flexible base and wedge friction-fit in the ashtray while the rigid arm and body bolt together; installation uses no clips, adhesive, or vehicle modifications.

Fits Panamera · G1 (970)

An iPhone X holder shaped to fit the center-console power-outlet opening.

Fits Macan · 95B

Dual can holder with a rectangular base and raised retaining walls, designed and test-fitted by the creator in a 2001 Boxster S 986.

Fits Boxster · 986

Separate front-dashboard and rear rings for mounting 4-inch replacement speakers. The front and rear geometries differ, and installation requires cutting the new speakers' mounting tabs and bonding their outer rings to the adapters.

Fits 911 · 996

Rear-seat cigarette-lighter replacement panel for installing aftermarket power ports while reusing the original plate screws.

Fits Cayenne · E1 (955 / 957)

Finishing fascia for an Android two-DIN radio in the 159. The creator gives an 11.5 × 19.2 cm radio size, a 13 × 20.2 cm dashboard opening, and printed it in black PETG.

Fits 159 · Tipo 939

Adapter for mounting a standard tweeter on the original 145 tweeter mount. The creator glued the tweeter to the adapter and removed the front grille and bent the tweeter wire pins to fit the available space.

Fits 145 / 146 · 145 / 146 (Tipo 930)

Can holder sized for a 0.5-litre, 67 mm can and designed for the 159.

Fits 159 · Tipo 939

Two-part replacement sun-visor retaining clip. The creator recommends printing the base on its side for strength and using ABS because PLA may fail at cabin temperatures.

Fits 156 · Tipo 932

Clutch-alignment tool for Lampredi two-litre twin-cam engines, explicitly including the 155 Q4. The creator notes that a printed tool is suitable for occasional use.

Fits 155 · Tipo 167

Replacement cover for the Bosch idle-control valve sensor used on the 156 and 166. The creator designed it because the original cover is discontinued separately from the complete sensor.

Fits 156 · Tipo 932 · 166 · Tipo 936

Replacement clip for the soft-top hood bag/tonneau cover.

Fits Spider · Series 3 (Tipo 115)

Printable left- and right-side map-pocket shells, back plate, and edge trims intended to be covered with vinyl; the back plate is made from 1–1.5 mm aluminium sheet.

Fits Giulia GT / GTA · Tipo 105 / 115 Coupes

Panels, connector cap, and switch plate for relocating an OBD-II socket inside the driver-side storage compartment while allowing the compartment to close.

Fits MiTo · Tipo 955

Replacement covers for the interior door-handle screw openings.

Fits 159 · Tipo 939 · Brera · Tipo 939 · Spider · Tipo 939

Adjustable phone holder designed and measured on a 2018 vehicle, with 13 mm and 16 mm frame variants. The creator recommends PETG after a PLA version deformed in a hot parked car.

Fits Giulia · Tipo 952

Replacement push lugs for the window switches. The creator intentionally made them long so they can be trimmed to length.

Fits 147 · Tipo 937 · GT · Tipo 937

Removable mounts for attaching light LED bars to the front grille without leaving a mark. The creator fitted the design to both the 159 and Brera grille.

Fits 159 · Tipo 939 · Brera · Tipo 939

Driver- and passenger-side belt guides that fit between the adjustable headrest and seat for inertia-reel belts. The holes accept the original rubber grommets.

Fits Spider · Series 2 (Tipo 105 / 115)

Strengthened replacement bezel that snaps onto the heated-seat control knob. The creator notes that the seat opening must be enlarged slightly for this reinforced version.

Fits 159 · Tipo 939

Replacement clip-in latch for the overhead sunglasses holder. The creator developed it through several fitting iterations and specifies ABS or nylon for cabin heat.

Fits 159 · Tipo 939

Replacement clip for a broken hinge pin on the dashboard storage-bin lid. The creator specifies 0.2 mm layers, 100% infill, side orientation and supports.

Fits Giulietta · Tipo 940