The parts catalog
Find your fit. Download a free file or choose a maker to print and ship your part.
2,661 matching parts
Free files. Made for your car.
C3D–02187Clip for 7.5 mm Lumenition Performance high-tension ignition leads used on Alfa Romeo Tipo 105 cars. Confirm lead diameter, avoid sharp bends, and keep the clip clear of hot or moving engine components.
Fits 1750 / 2000 Berlina · 1750 Berlina (105.48) · 1750 / 2000 Berlina · 2000 Berlina (105.12) · Giulia · Tipo 105 / 115 Berlina +5
C3D–02186Replacement spacer for the speedometer drive where the cable connects on Alfa Romeo Tipo 105 cars. The creator copied an original spacer, printed it in ASA, and reports successful fit and operation.
Fits 1750 / 2000 Berlina · 1750 Berlina (105.48) · 1750 / 2000 Berlina · 2000 Berlina (105.12) · Giulia · Tipo 105 / 115 Berlina +5
C3D–02185Replacement clamp/spacer securing heater-control cables to the heater levers in Alfa Romeo Tipo 105 and 115 cars. The creator printed PETG at full infill and suggests checking shrinkage and lever movement after installation.
Fits 1750 / 2000 Berlina · 1750 Berlina (105.48) · 1750 / 2000 Berlina · 2000 Berlina (105.12) · Giulia · Tipo 105 / 115 Berlina +8
C3D–02184Flexible replacement floor bung or blind grommet for 1960s–1970s Alfa Romeo Tipo 105 and 115 vehicles. Print in TPU and verify the opening size and retention before road use.
Fits 1750 / 2000 Berlina · 1750 Berlina (105.48) · 1750 / 2000 Berlina · 2000 Berlina (105.12) · Giulia · Tipo 105 / 115 Berlina +6
C3D–02183Alternative M6 and M4 adapters for fitting an aftermarket threaded shift knob to the standard shift rod. Use the M6 variant with an intact original thread; the M4 variant requires drilling and tapping a damaged rod. Confirm secure retention, full gear selection and no reverse-lockout interference before driving.
Fits Giulietta · Tipo 940
C3D–02182Three attachment joints for bonding inside a right-side aftermarket mirror cap. The creator specifies Alfa Romeo Giulietta fitment and epoxy adhesive. Right side only; dry-fit every joint, prepare bonding surfaces correctly, and verify the cap remains secure.
Fits Giulietta · Tipo 940
C3D–02181Replacement retainer for the 90-degree end of a broken interior door-release cable. The creator redesigned and installed it in a Giulietta door mechanism. Use a tough material and verify reliable repeated release from inside and outside before returning the vehicle to service.
Fits Giulietta · Tipo 940
C3D–02179Left- and right-side spacers that provide clearance for protruding LED high-beam cooling hardware while retaining the original rear headlamp covers. The creator requires silicone sealing. Use heat- and weather-resistant material and verify both covers remain secure and watertight after installation.
Fits Giulietta · Tipo 940
C3D–02178Press-fit holder for a slim beverage can in the center console. The creator designed and physically fit-tested it in a 2018 vehicle. Confirm stable retention and keep the container clear of the handbrake and controls.
Fits Giulietta · Tipo 940
C3D–02177Reinforced replacement for a weak interior pull handle reverse-engineered from the original component. Use a tough, heat-resistant material, compare the mounting points with the original, and verify the handle is securely retained before use.
Fits Giulietta · Tipo 940
C3D–02174Custom spacer plate for a door-mounted stereo speaker.
Fits 944 · 944
C3D–02173Custom front wheel seal installer.
Fits 944 · 944
C3D–02172Replacement (88 later) sunroof cam.
Fits 944 · 944
C3D–02171
C3D–02169
C3D–02167
C3D–02165Replacement shift boot and fader covers.
Fits 944 · 944
C3D–02163
C3D–02162
C3D–02158Replacement abschlepphaken abdeckung tow hook cover.
Fits 944 · 944
C3D–02156
C3D–02153
C3D–02152
C3D–02150Replacement back hatch drain.
Fits 944 · 944