Forester First generation (SF)

The stock sliding cover was slipping and wouldn't catch the rear part anymore so I made this one to have it be functional.

Fits Forester · First generation (SF) · Impreza · First generation (GC/GF/GM)

Printed with 0.4 nozzle and 0.1 resolution. Infill 100% ofc. Layed on back with supports. Fits and works well.

Fits Forester · First generation (SF)

I designed this speaker adapter to mount a pair of hertz speakers for a friend on his Subaru Forester (model year 1997). The speakers are 165mm wide and he bought them from amazon (Hertz dcx 165). The adapter can be mounted on the front doors panel using the original screws and to link the speaker to the adapter you have to use the original screws plus one because it has four holes. To prevent vibration on the panel, it's recommended to put a little layer of insulation material on the adapter's surface that is in contact with the door's panel (as the original speaker mount). The adapter has two grooves, to pass the wires; and the higher depth of the speaker isn't a problem for the door glass (when you pull it down), it doesn't touch it. Ho progettato questo adattatore per montare un paio di speaker Hertz sulla Subaru Forester di un amico (modello anno 1997). Gli speaker hanno diametro 165mm e sono stati comprati su amazon (Hertz dcx 165). L'adattatore può essere montato sul pannello porta (portiere anteriori) utilizzando le tre viti originali e per montare lo speaker all'adattatore si possono usare le viti originali, più una dato che la cassa ha un foro di fissaggio in più. Per evitare vibrazioni e rumori, si consiglia di mettere un leggero strato di materiale isolante sulla superficie dell'adattatore in contatto con il pannello porta (come nel porta-speaker originale). L'adattatore presenta due scanalature per far passare i cavi; e la profondità maggiore dello speaker non è

Fits Forester · First generation (SF)

Subaru Forester 1996-2002 CAP-WASHER TANK Original part #86615 I lost my own and print to replace it. There are latches on the inside of the washer cap. And I also made a loop where you can tie a rope so that you don’t lose it again! :) --- Subaru Forester 1996-2002 крышка бочка омывателя. Оригинальный номер #86615 Свою я успешно где-то потерял, придумал замоделить. Внутри крышки защёлки. А также сделал петлю куда можно привязать шнурок чтобы больше её не потерять! :)

Fits Forester · First generation (SF)

Pull Handle OPENNER for Subaru Forester SF LH can b mirr to RH? dntknw

Fits Forester · First generation (SF)

If you like the design and wouldn't mind, please give me a watch and subscribe on youtube...I have videos designing these types of things from time to time and could use the support! My Youtube > https://bit.ly/35j5BL1 IG - @Myowncasualty IG - @EndMotive I printed this on an Elegoo Mars....supports will be hard to remove on an FDM printer without dissolvable support material. Fits LHD Subaru Forester SF/SG ....make sure your dash matches the one pictured. Includes 52mm and 60mm variant. No hardware or anything required. Just remove the factory dash vent carefully and this will clip in place just like the factory part. Also has a small routing hole to run wires. The vent still functions....just not as good lol.

Fits Forester · First generation (SF) · Forester · Second generation (SG)

forester_sf_5_radiator_grill_mount

Fits Forester · First generation (SF)