Outback

Clip-on dashboard vent mount for a Garmin GPS/navigation unit in the center vents of the 2015 Subaru Outback (fifth generation, BS). The flexible clip straddles the emergency-flasher button area while preserving access to the vents and can be moved between the two center vents; the updated version has reduced pivot range compared with the original clip and is intended to print vertically with tree supports. The vehicle and GPS device are not included.

Fits Outback · Fifth generation (BS)

Two alternative full-size phone-mount variants for the center-console coin pocket of the 2018 Subaru Outback fifth generation (BS). One variant uses a 1.25-inch slot interface and the other provides a flat face for an adhesive-backed mount. Printed parts only; phone, adhesive mount, and mounting hardware are not included. Verify pocket interface, device clearance, retention, cable routing, and unobstructed visibility before driving.

Fits Outback · Fifth generation (BS)

Hanging two-way-radio mount with an integrated cup holder that attaches to the passenger-side centre storage area of the BT Outback without drilling or modifying the vehicle. The multipart kit includes the main body, two hangers, and a paired support component; it is sized for a small 100 mm × 25 mm GMC radio, and the included geometry supports resizing for other small radios.

Fits Outback · Sixth generation (BT)

Right-side spring-loaded support peg for the retractable rear cargo cover. It replaces the broken peg at the right mounting point and restores the cover’s retention. The included component is the solid-shaft version 2 for the right side; the opposite side uses different shaft geometry. Print on its side with supports for shaft strength. PETG or ABS is recommended for automotive heat exposure. Verify the 2009–2014 fourth-generation Outback side, mating interface, fit, and retention before use.

Fits Outback · Fourth generation (BR)

Full-size storage bin that clips around the retaining features of a driver-side fuse-panel lid and provides a compartment for keys, spare fuses, cash, or other small items. Designed for fuse-lid part number 66135AJ020 and verified for the accepted Subaru generation IDs. Print the selected geometry in PETG for improved resistance to heat inside a vehicle; reorient the model flat on its base and verify clip engagement, clearance, and retention before use.

Fits Ascent · First generation (WM) · Forester · Fourth generation (SJ) · Forester · Fifth generation (SK) +8

Interior fuse-box cover for the driver-side lower-dash fuse-box location on the sixth-generation Subaru Outback. Two variants are included: one with an opening for adding buttons or switches and one with a closed face. Verify the vehicle cover geometry and any switch dimensions before installation.

Fits Outback · Sixth generation (BT)

Replacement left- and right-side covers for the front headlight-washer nozzle openings. The side-specific files fit Subaru Legacy IV sedan and station wagon applications from 2003-2009 and Subaru Outback III applications from 2003-2009, including the Outback sedan from 2004-2009. The left and right covers correspond to OE identifiers 86636AG260 and 86636AG250; select the file matching the vehicle side. Use a heat- and weather-resistant material suitable for exterior automotive service.

Fits Legacy · Fourth generation (BL/BP) · Outback · Third generation (BP)

Cap-style oil-filter removal wrench for vehicles using Subaru filter 15208AA15A. It seats around the filter canister to aid hand removal during oil changes; verify the filter number and fit before applying torque. The packet contains one wrench geometry.

Fits Ascent · First generation (WM) · Forester · Third generation (SH) · Forester · Fourth generation (SJ) +12

Full-size cylindrical spacer that drops into the front center-console cup-holder opening to raise the base for shorter cups and mugs. The verified source fitment covers the 2019-2025 Outback model-year span represented by the selected live generations. Print as one piece; creator guidance specifies PLA at 15% infill.

Fits Outback · Fifth generation (BS) · Outback · Sixth generation (BT) · Outback · Seventh generation (BT2)

Right-hand rear cargo-cover catch/support for the first-generation Outback/Legacy wagon cargo-cover assembly. Replaces the original screw-mounted catch and retains the retractable cargo cover; mirror the model for left-hand use. Print with supports as needed and use a heat-resistant material such as PETG or ABS for vehicle interior temperatures.

Fits Outback · First generation (BG)

Female replacement clip for the all-weather rear-seat covering on the 2009–2014 vehicle generation represented by generation ID 1209. It replaces the broken female sides while the existing male screw-like portion remains in place; the printed clip is approximately 25 mm in diameter. Print in PETG or ASA using metric units, and verify fit, engagement, and retention before installation.

Fits Outback · Fourth generation (BR)

Flexible replacement grommet that retains the hood support rod at the front hood mounting point. Verified applications include the listed Impreza, Legacy, Outback, Forester, and Baja generation IDs; compare the original opening and rod diameter before installation. TPU is the intended material, and this work-in-progress design should be inspected for secure retention before vehicle use.

Fits Baja · First and only generation (BT) · Forester · First generation (SF) · Forester · Second generation (SG) +11