Model 3 First generation

Vehicle-specific wireless Qi charger assembly for Tesla Model S and Model X, designed for an IKEA LIVBOJ charger.

Fits Model S · First generation · Model X · First generation

Non-permanent, Command-Strip-mounted MagSafe phone mount specifically described for Tesla Model S.

Fits Model S · First generation

Mechanical anti-removal lock for the ATM.EVs Brazilian US-to-CCS2 adapter; creator tested only on a 2022 Model Y.

Fits Model Y · First generation

Mechanical lock for the J1772 adapter; creator states it works with Model S/X flange adapters and Model 3/Y.

Fits Model 3 · First generation · Model S · First generation · Model X · First generation +1

I made a coat hook for the new refreshed (2021+) Tesla Model X seat. The original Tesla hooks (https://shop.tesla.com/product/2012-2020-_-model-s_x-coat-hooks) only work on older cars. Inspired by the original, I made a new one that will fit on the plastic cover of the seat. It should be printed on PETG or ABS, since PLA can deform in higher temperatures.

Fits Model X · First generation

Based on Motorpixiegmibals model - Extend the bottom to fit Tesla Model S and X - Printed in Bambu P1P - Using PLA - Printed in 24m - with Raft

Fits Model X · First generation

This is a wireless magsafe charger for a Tesla Model X (before the 2020 refresh). It fits nicely in the phone slot in the center console of the Model X. I've tested it in a 2019 Model X and with both an Iphone 14 pro and 13 pro. To make this, you will need the following: 1. A puck-style magsafe wireless charger. The one I chose is https://www.amazon.com/dp/B0B6ZK81WH . If you choose another wireless charger, you may need to alter the model to fit your charger. 2. Hot-glue. 3. One of the included model files. (Both are the same, I just provided multiple formats) I printed the model face down on a glass bed with support. After printing, simply glue the charger in place and glue any excess wire out of the way. This model was inspired by this product that I saw online: https://greenmissionstore.com . I didn't buy their charger, but I thought I would give them a shout-out.

Fits Model X · First generation

This is an adapter to make the trailer hitch socket on the Tesla Model X more accessible. In addition to this adapter, the following items are required: Company Hella 8JA 005 951-001 Company Hella 8JB 005 949-012 Cable 13-pin 2,5mm² 3 cylinder head screws M5x40mm 3 hexagon nuts M5

Fits Model X · First generation

I needed a headrest mount for my kids' various devices which actually fits the quite special Tesla headrest. This is a remix of https://www.thingiverse.com/thing:2255304 (attach to headrest) and https://www.thingiverse.com/thing:2986970 (universal tablet holder). The holders have been in use for the past 2 years now, holding everything from IPad to Switch to Books … ## Instructions (copy/pasted): Since I mainly remixed parts, best explanations can be found with the original items: ### [Headrest](https://www.thingiverse.com/thing:2255304) *The tiltable version needs a M10 hex nut and a bolt.* *Needs to be printed in two/three parts, and glued together.* *Glue the vertical beam on the exact middle point of the horizontal beam.* ### [Tablet Mount](https://www.thingiverse.com/thing:2986970) *It uses standard M6 bolts and nuts. It can be adjusted freely fit every rectangular piece of technology* (I added some felt-stickers to be able to make the hooks fit more tight without scratching anything)

Fits Model X · First generation

Tesla Model X buddy console storage organizer (below the center console screen) - 2 large bays (sunglasses / wallet) - 1 thin card bay I glued a rubber mat inside the bays to prevent stuff from sliding.

Fits Model X · First generation

I wanted a place to keep my sunglasses in my 2020 Tesla Model X. These clip on right above the driver and front passenger's heads and hold them in place even during strong acceleration/deceleration. Printed in Prusament PETG, 0.3mm layers, no supports. I doubt these would work well in PLA since they need to be a little bit flexible in order to get the glasses in and out of the clip.

Fits Model X · First generation

Homemade Tesla AirVent clip for mobile holders. Also added an iPhone 11 Pro Max holder that are designed for using Krussel ultrathin case on your phone. This case is 0.something mm thin, so I guess it woks good without the case as well. The airvent clip is skeewed a bit to the right (see the bottom picture) to be able to see the whole screen of your phone and not get it hidden by the steering wheel. I have printed this with 10% infill on an old Flashforge creator (not PRO) printer using ABS. Then I used superglue to mount these together. Created in Fusion360 and printed with astroprint.

Fits Model X · First generation

My wife created some custom seat back covers for my 2020 Tesla Model X. These are the new seats with fixed head rests. To keep the covers attached, I 3D printed these small hooks. You can see them in the picture; I slide them onto the edge of the hard plastic part of the seat back, over the stretched cover, and they hold the cover in place very well. Printed in Prusament Black PETG, 0.3mm layers.

Fits Model X · First generation

Modified the model X wireless charging dock on thingiverse for a larger faster charging pad. At first I thought that I slanted it enough but even with just the long range model my note 10+ would flop off during fast acceleration. Just added a snap on cover for it now for acceleration proof. :) tesla_x_phone_charger.stl is the snap on cover for Note 10+ without case. tesla_x_phone_charger2.stl is snap on cover for phones with case.

Fits Model X · First generation

I have choosen a open license, but please dont sell this item in Norway on online sites like example Finn, Facebook or business sites. Version V1 never got printed by me. Version V3 is the one on the pictures. Version V4 made the edge smaller since I thought it was a thight fit with V3. But also this version have not been printed by me. Version V4 closed middle is by a request and have not been test printed by me.

Fits Model X · First generation

This is a holder for the J1772 Adapter for Tesla Model X. The holder slides under the driver car seat and the door trim, which holds it in place. This allows easy access to the J1772 adapter without taking any additional space. I designed this in Fusion 360 and you can see the latest version [here](https://a360.co/2FSuKQL).

Fits Model X · First generation

Original Tesla Model X rivets securing the hitch rack plastic panel are not very practical to unlock. This is a redesigned rivet you can lock and unlock with no tools. __Edit__ : Uploaded a v2 which should unlock a bit better. On the photo, there's a print of v1 made with a 0.2mm nozzle, 0.1mm layer height.

Fits Model X · First generation

Tesla Model X center console large storage organizer - 5 large bays - 4 coin bays (sized for Euro coins) - 4 credit card bays - 2 small bays - optional removable trashcan

Fits Model X · First generation

(this is the first version, the newer and larger version can be found here: https://www.thingiverse.com/thing:3047570) Tesla Model X center console storage organizer with quick-removable trashcan - 4 coin bays (sized for Euro coins) - 4 charger/credit card bays (different depth) - 1 large bay - 2 medium bays (for optional trashcan)

Fits Model X · First generation

This is my Tesla Model S/X cubby drawer. There are two versions, one with a standoff for using a metal pull handle and another version with a finger hole, so you don't need anything else. I use ABS for printing, but PETG works very well, too, and is shinier. You can apply a wrap to the front to give it a carbon fiber look or whatever else you want. I have Cricut files for the front face somewhere if someone wants those. I would imagine printing this out of TPU/Ninjaflex might make for an interesting drawer. Both version of the drawer have the integrated J1772 holder. I have a version without it, but I don't really see a point in making a drawer without it, as you don't have to use it if you don't want to and it gives you some space for change or keys, or something else. This should print fine without any supports. My Solidworks license expired and they are such a pain to deal with, I haven't bothered renewing it, so this design is stuck in Solidworks and I can't really make any further modifications. I've switched over to Inventor, but importing it leaves a lot to be desired. The shape of the cubby is really odd, so it leads to some weird angles that are hard to make work on a single piece, if you want the drawer to fit properly. If you look at all the commercial drawers, they don't fit in the cubby exactly right, and now I know why... it's almost impossible to get a properly shaped drawer that will fit the cubby hole. To make matters worse, it seems different model years have very slightly different cubby dimensions, so the drawer fits some and not others. The solution is to scale this by 1 or 2 % and it should fit your cubby, but it might be a little loose in one dimension when you do that. I had intended this to be a retainer free drawer that could survive ludicrous launches, and it does, if your cubby is of the right vintage. Be sure to take out any rubber material that lines your cubby, as it will not fit with the drawer.

Fits Model X · First generation

3D Printable mounting bracket for the Tesla Model X Front License Plate. It is designed to be inserted into the lower grill in the front (in the middle section of the lower grill). The reason it is designed in such a way is because the intended use is to get out of "Fix It" tickets. When you get a "Fix it" ticket for no front license plate. You set this up and slip it on the lower front grill. You show it to the cops and you pop it off once the cop signs your ticket. If you want to secure this to the front grill, there are holes in the bracket where you can add zip-ties to hold it together. Revision History: 10May2018 - Added 3 Files with *_FDM suffix that are meant to be easier for FDM printers to print.

Fits Model X · First generation

This is a iPhoneX dock for newer Tesla Model S/X cars. It fits in the phone dock slot in the console and has room for a Qi wireless charger. The Qi charger i used is from amazon: https://www.amazon.com/gp/product/B075Q97P9T It’s also sold under a couple different names there. *edit* I added a new version of the dock which uses a more robust Qi charger: https://www.amazon.com/gp/product/B07S6MVPVL The Qi charger used in the previous version appears to have a very short lifespan, as the electronics hidden in the USB plug die after a couple months. The new version has the added benefit of using a USB-C connector, which means you can use it to charge the phone directly if it's really low.

Fits Model X · First generation

Tesla Model X Tray fits within the center console cubby. The original design was a rectangle, and it didn't fit properly. A slight taper was added. Use a tiny screw (or glue) to attach the pull handle to the tray. I printed this in ColorFabb nGen Black and Silver on a Makerbot 2X. Designed in OnShape. Original Cad Model: https://cad.onshape.com/documents/d53eb0b85d968c9eadcd7635/w/a7a6ecb498006aa7de664231/e/14d5dd7b90f2ef96f2eddbd1

Fits Model X · First generation

The Tesla Model X has a great center console phone holder, but it is not designed for wider devices or phones with cases. I designed these more accommodating clips based on the 2017 model's original ones, but with a gentle spring to center the phone instead of hard rails.

Fits Model X · First generation