Find your next part.

This 3D-printed seat lever cover is designed as a replacement cover for the seat-folding lever mechanism used for the 6th and 7th passenger seats. It provides a neat, durable solution when the original plastic cover is damaged, missing or worn.

Fits Discovery · 4

Bushing located at both ends of the rod connecting the wiper motor to the wipers. Print in plain nylon for best results. Video of install here: https://youtu.be/1ZTh9ZuZpTM?si=5zUaRD01rmpsLkAI

Fits Land Cruiser · 60 Series

If you mount the MRC7354 "Soft Top Front Seat Belt Bar For Land Rover Defender / Series" the tube do not fit very well the the capping. This part gives it a nice an stable connection. Needs tu be drilled trough after mounting fpr a tight fit. Drill 8 mm oder 5/16 "

Fits Defender · 200 Tdi · Defender · 300 Tdi · Series · 2 +2

Full-size replacement headlight-washer cover for the 2006 Volvo S60 first generation. The cover fits over the front-bumper headlight-washer nozzle; the corroborating source notes that supports under the clips are required and reports testing in PETG (spelled "PTEG" in the indexed note). Verify the nozzle tabs and bumper fit before installation and paint to match as needed. Source: jedas, Creative Commons - Attribution.

Fits S60 · First generation

Vehicle-neutral phone insert for the Volvo XC40 center-console cup holder. Source creator milcent identifies it as a remix of an Opel Astra cup holder; the Thingiverse source lists additional STL/STEP files and a Fusion 360 design file. Free download under Creative Commons - Attribution - Non-Commercial - Share Alike: attribution and ShareAlike are required, and use is non-commercial only.

Fits XC40 · First generation

Drop-in organizer for the Volvo S60 first-generation tunnel console, with a coin holder, credit-card holder, pencil slot, and multiple small pockets. The creator specifies no print material; PETG is an engineering-inferred material choice for cabin heat. Verify trim variant, dimensions, fit, retention, clearances, and unobstructed access before use. Source rights are CC BY-NC-SA 4.0: attribution, noncommercial-only use, and ShareAlike apply.

Fits S60 · First generation

Functional full-size console cup holder for Volvo V60/V90/XC60/XC90 SPA applications, scoped here to Volvo XC60 second generation (live generation 1755). The creator says it is for aluminium cans and states "Print in PETG." Two original STL files are included. Hybrid-model fitment is explicitly uncertain; verify the console, variant, clearances, retention, and print strength before use. Source rights are CC BY-SA: preserve attribution and ShareAlike terms.

Fits XC60 · Second generation

Functional full-size replacement plastic fitting for the Volvo C30 crankcase-ventilation system, assigned to Volvo C30 First and only generation (2006–2013). The source identifies the exact C30 fitment and creator Vebjørn Matre Fosse; public search evidence describes PETG use. Attribution is required under the source’s Creative Commons — Attribution license. Verify engine variant, dimensions, material suitability, and secure fit before use; this is not a verified OEM part.

Fits C30 · First and only generation

Printable replacement rear sway-bar bushing for the first-generation Volvo XC90 (live catalog generation 1751, 2002–2014). The creator specifies solid TPU printing and recommends printing solid for durability; verify sway-bar diameter, bracket fit, material suitability, and installation before use.

Fits XC90 · First generation

Full-size replacement floor plug for Volvo 240 floor openings. The creator describes it as a plastic replacement for the factory steel floor plugs and shows it installed in a vehicle floor. The source print was made in PLA at 20% infill; preserve the source Public Domain license.

Fits 240 · 240 Series

Two-piece mirrored phone holder that clips over the Volvo V40 dashboard trim and holds a phone in the center dashboard area. The creator sized it for an iPhone 11 in a case and reports that other phones may fit; the two printed pieces are joined with bamboo skewers or another suitable rod. Creator: Albert Polak. Source license: Creative Commons — Attribution; attribution required.

Fits V40 · Second generation

Replacement roof/load-bar pad for Volvo V70 and S60 P2 applications named by the creator. The part protects the load-bar mounting points. The creator does not specify a print material; TPU is engineering-inferred for a flexible, weather-exposed pad. Verify the carrier profile and fit before road use.

Fits S60 · First generation · V70 · Second generation · V70 · Third generation

Printable reproduction of Volvo special tool 9995449 for installing a front camshaft seal squarely and to the specified depth. The source includes flush, +1 mm, and +2 mm variants; the creator recommends PLA, at least 50% infill, and at least 3 perimeters, and says the original bolts can be reused. The creator warns that printed/plastic tools can shatter or break: inspect the print, use appropriate protection, and verify the applicable Volvo procedure before use. The +1 mm and +2 mm deeper variants are not approved by the cited manual according to the creator.

Fits S60 · First generation

Functional full-size gap-filler inserts for the Volvo V90/S90 panoramic sunroof seal/gasket gap. The source provides left/right variants in multiple thicknesses; measure the vehicle gap and choose the matching STL. Personal-use only under the source Creative Commons Attribution-Noncommercial-ShareAlike terms: attribution, noncommercial use, and ShareAlike are required.

Fits S90 · First generation

Vehicle-specific replacement mounting plate for three 52 mm auxiliary gauges in the Volvo 940 middle console, also identified by the creator for Volvo 740 fitment. It replaces the ash tray and small storage compartment and uses integrated hooks plus the stereo mounting bracket for retention. Personal use only under the source Creative Commons Attribution-Noncommercial terms: attribution is required and commercial use is not permitted. This is not an OEM part; verify gauge depth, fit, retention, wiring, trim clearance, and print material suitability before installation.

Fits 940 · 940

Full-size replacement fuel-line pipe clip for the Volvo XC60 First generation (2008-2017), based on the creator's statement that a friend's Volvo XC60 fuel-line clip broke and this design was made as a replacement. The creator specifies PETG, 50% infill, and supports. Verify the exact vehicle generation, fuel-line routing, clip retention, hose diameters, heat and chemical exposure, print orientation, and clearance before installation or road use. Attribution, noncommercial use, and ShareAlike restrictions from the source apply exactly.

Fits XC60 · First generation

Fascia-mounted holder for a standalone CarPlay display that replaces the standard radio face-plate fascia on Volvo S40 Second generation (2003-2012) and Volvo V50 First generation (2003-2012). The updated design uses three M4 threaded inserts and bolts and includes a separate pilot-hole guide. Indexed creator/source metadata recommends PETG or another heat-resistant filament with at least 15% infill; verify trim, display dimensions, visibility, clearances, retention, and print material before installation. Original creator: Encounter51. CC BY-SA applies: preserve attribution and ShareAlike terms.

Fits S40 · Second generation · V50 · First generation

Replacement door-handle clips for Volvo 940 and Volvo 960/S90/V90-generation applications. The creator describes the part as a replacement for Volvo 960 3.0 door handles, while the corroborating listing identifies 1991 Volvo 940 fitment and a free CC BY-4.0 STL. Remove support remnants and verify the original handle geometry, retention, clearance, and secure operation before use.

Fits 940 · 940 · 960 · 960/S90/V90

Full-size functional replacement trunk tie-down/bag hook accessory. The creator identifies fitment for the 2019 Volvo S60 and vehicles using Volvo child part 39835508; insert the stem into the trunk clip body and twist to lock it in the rectangular trunk opening. The source model was printed with PLA and recommends PETG at least or ABS for automotive use. Verify fit, secure retention, clearances, and load suitability before use; this is not a certified cargo-restraint anchor.

Fits S60 · Third generation

Full-size functional phone dock for the Volvo C40 and XC40 Recharge center-console ashtray cubby, between the wireless charger and shifter. The creator describes no-drill installation and removal, a viewable phone angle, Lightning or USB-C cable routing, and non-slip pads to secure the dock in the cubby and retain the phone. The design was sized around an iPhone 11 Pro with a thin case; thicker cases may fit tightly. The source omits a print-material recommendation, so PETG or ABS is engineering-inferred for cabin use. Verify phone/case/plug fit, retention, cable routing, clearances, and unobstructed controls before driving. CC BY-NC attribution and noncommercial restrictions apply.

Fits C40 · First generation · XC40 · First generation

Full-size functional replacement magnetic lock for the Volvo 940 center-console armrest. The creator specifies a 10 mm diameter × 5 mm high flanged magnet with a 2.5 mm hole and a generic panel clip, and notes that the model holes may be drilled to match the available screw. Print in ABS, ASA, or another heat-resistant material rather than PLA because of hot vehicle interiors; verify fit, hardware retention, and latch operation on the specific armrest before use.

Fits 940 · 940

Full-size functional Samsung tablet stand for the first-generation Volvo XC60 dashboard center-vent/center-stack area. The creator describes a 10-inch Samsung tablet, charging capability, no panel editing or damage, easy installation/removal, and required support. Source photos show the printed stand installed around the XC60 center vents. Verify tablet and case dimensions, retention, charging-cable routing, visibility, vent airflow, hazard/control access, and clearances before use. PETG or ABS are engineering-inferred for cabin heat resistance because the source does not specify filament. CC BY-NC attribution and noncommercial restrictions apply.

Fits XC60 · First generation

Replacement clip for the convertible-top headlining assembly. The creator states it was designed for a 2012 Volvo C70, engages the associated receiver, and replaces Volvo clip 31256449; print guidance specifies 0.12 mm layers, no supports, and 100% infill.

Fits C70 · Second generation

Replacement plastic retainer for the inner upholstery/lining on the boot lid of the Volvo S40 II, 2003-2012 generation. The recovered original is a CC BY-4.0 Thingiverse design by thermaq; preserve attribution and the original source link. The public recovery page lists standard FDM guidance of 0.2 mm layers, 70% infill, and supports as needed.

Fits S40 · Second generation