Impreza

3D-printable holder for a Samsung Galaxy Note 9. The printed rail mounts between the radio and dashboard/vent area and supports the phone in front of the center vents. Verified fitment covers 2012-2016 Impreza and 2013-2017 Crosstrek vehicles. The printed holder is the modeled component; the phone and any non-printed mounting hardware are not included.

Fits Impreza · Fourth generation (GJ/GP) · XV / Crosstrek · First generation (GP)

Replacement lower instrument-panel cover that fills the factory switch/blanking-panel opening and restores the retaining features of the original cover. Verified fitment is the first-generation Subaru Impreza GC/GF/GM and first-generation Forester SF, corresponding to OEM 66813FA000; verify the dashboard variant and retention before installation.

Fits Forester · First generation (SF) · Impreza · First generation (GC/GF/GM)

Full-size storage bin that clips around the retaining features of a driver-side fuse-panel lid and provides a compartment for keys, spare fuses, cash, or other small items. Designed for fuse-lid part number 66135AJ020 and verified for the accepted Subaru generation IDs. Print the selected geometry in PETG for improved resistance to heat inside a vehicle; reorient the model flat on its base and verify clip engagement, clearance, and retention before use.

Fits Ascent · First generation (WM) · Forester · Fourth generation (SJ) · Forester · Fifth generation (SK) +8

Two-piece overhead map-light accessory switch mount for the 2008-2011 Impreza and 2008-2014 WRX/STI. It mounts four generic 22 x 38 mm rocker switches ahead of the map light, uses the factory map-light bezel screws, and supports optional fastening to the upper windshield frame. The selected set includes the upper bracket, a holey bucket with access holes for hard-mounting, and an editable STEP version. Supports and minor filing or redrilling may be needed; PETG or another heat- and UV-resistant material is recommended for in-vehicle use.

Fits Impreza · Third generation (GE/GH/GR/GV) · WRX · First generation (VA)

Single-piece center-console cup-holder insert for the 2001 Subaru Impreza. It drops into the center-console opening, adds a round recess for larger drink vessels, and retains a small adjacent storage pocket. Verify console variant, final scale, clearance, retention, and heat suitability before driving.

Fits Impreza · Second generation (GD/GG)

Cap-style oil-filter removal wrench for vehicles using Subaru filter 15208AA15A. It seats around the filter canister to aid hand removal during oil changes; verify the filter number and fit before applying torque. The packet contains one wrench geometry.

Fits Ascent · First generation (WM) · Forester · Third generation (SH) · Forester · Fourth generation (SJ) +12

Full-size functional adapter that clips into the bottom of a Momo Race Air gear knob and retains the leather shift boot/gaiter beneath the knob. Fitment is source-backed for a 2002 Subaru WRX within the second-generation Impreza GD/GG application represented by generation 1197. Print in PETG for cabin heat resistance, verify the knob and shifter interfaces before installation, and confirm secure retention before driving.

Fits Impreza · Second generation (GD/GG)

Full-size two-section adapter for a factory front center-console cup-holder opening. It enlarges the opening to retain a 40 oz water bottle; the printed geometry has approximately 95 mm upper inner diameter, 70 mm lower inner diameter, and a 100 × 145 mm overall envelope. Use a heat-resistant filament such as PETG or ASA; the source print guidance specifies no supports.

Fits Impreza · Third generation (GE/GH/GR/GV) · Impreza · Fourth generation (GJ/GP) · WRX · First generation (VA) +2

Replacement latch for the lower center-console storage box on the second-generation Subaru Impreza (GD/GG), source-verified for the 2002 application. It restores the lid retention function using the existing console interfaces. The single included STL is intended for PETG or ASA for cabin heat resistance; verify console variant, latch engagement, clearances, and secure retention before installation.

Fits Impreza · Second generation (GD/GG)

Full-size replacement hood support-rod retaining clip for the 2011-2016 Subaru Impreza (GJ/GP) represented by generation 1199. It secures the hood prop rod in its retaining position. Print in PETG at 100% infill as specified for the model, and verify rod diameter, clip engagement, hood clearances, and secure retention before road use.

Fits Impreza · Fourth generation (GJ/GP)

Console organizer tray with a cord pass-through opening and integrated coin compartments for the upper center-console storage area. Verified fitment: 2012-2017 Subaru XV/Crosstrek first-generation GP and 2012-2016 Subaru Impreza fourth-generation GJ/GP.

Fits Impreza · Fourth generation (GJ/GP) · XV / Crosstrek · First generation (GP)

Larger headlight cover for 2003-2005 Subaru Impreza GD/GG Blobeye headlight assemblies when LED lights are installed. Reuse the original seal rings. The model provides one cover; use an automotive-temperature filament appropriate for the installation environment.

Fits Impreza · Second generation (GD/GG)